熱浸鍍鋅鋁鎂合金薄鋼板的標準規范

Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process

碳鋼管熱噴鋁（TSA）涂層應用的標準實施規程

Standard Practice for Application of Thermal Spray Aluminum (TSA) Coating to Carbon Steel Pipe

現場螺栓連接管、管拱和拱用鍍鋅波紋鋼結構板的標準規范

Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

鍛鋼管件通用要求的標準規范

Standard Specification for Common Requirements for Wrought Steel Piping Fittings

鎘-鋅機械沉積鍍層的標準規格

Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited

鋅鐵合金鍍層電沉積涂層的標準規范

Standard Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits

在鎂和鎂合金上涂覆非電解轉化涂層的標準實施規程

Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys

鎂合金鍛件的標準規格

Standard Specification for Magnesium-Alloy Forgings

使用水浸涂層測試耐水性的標準實踐

Standard Practice for Testing Water Resistance of Coatings Using Water Immersion

緊固件用磷酸鹽/油腐蝕保護涂層的標準規范

Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

犧牲鋅合金陽極標準規范

Standard Specification for Anodes, Sacrificial Zinc Alloy

緊固件用帶有或者不帶有整體潤滑劑防腐蝕涂層的無鉻鋅片復合材料的標準規格

Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners

美國材料與試驗協會出版物 STP 1100

Extending the Life of Bridges

鋼構涂層保護新概念

New Concepts for Coating Protection of Steel Structures

用于保護和修復混凝土結構的產品和系統 — 定義、要求、質量控制和合格評定 第9部分：產品和系統使用的一般原則

Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity Part 9 : General principles for use of products and systems

工業閥門 執行器 用于工業閥門的液壓部分回轉執行器 基本要求

Industrial valves. Actuators - Hydraulic part-turn actuators for industrial valves. Basic requirements

砌體連接器

Connectors for masonry

工業鍋爐腐蝕防護安全技術規范

Safety technical code for corrosion protection of industrial boilers

消毒劑金屬腐蝕防護導則

Guidelines for the protection of metals from corrosion by disinfectants

德國建筑包工合同程序 (VOB). 第C部分:建筑包工合同 (ATV) 的通用技術規范. 防雷系統的安裝

German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of lightning protection systems

鋼管和管件的聚乙烯涂層 第 2 部分：工廠應用的燒結或火焰噴涂涂層的要求和測試

Polyethylen coatings of steel pipes and fittings - Part 2: Requirements and testings of factory-applied sintered or flame sprayed coatings / Note: This standard is part of the DVGW body of rules.

鋼管和配件的聚丙烯涂層 第 1 部分：工廠應用的擠壓涂層的要求和測試

Polypropylen coatings of steel pipes and fittings - Part 1: Requirements and testings of factory-applied extruded coatings / Note: This standard is part of the DVGW body of rules.

木結構 銷型緊固件 要求

Timber structures - Dowel-type fasteners - Requirements; German and English version prEN 14592:2017

航天產品保證 腐蝕；英文版 EN 16602-70-14:2018

Space product assurance - Corrosion; English version EN 16602-70-14:2018

航空航天系列 鋁及鋁合金無六價鉻陽極氧化

Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys; German and English version EN 4827:2019

航空航天系列 鋁及鋁合金的六價無鉻陽極氧化

Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys; German and English version EN 4827:2019 / Note: To be replaced by DIN EN 4827 (2021-01).

航空航天系列 鋁及鋁合金無六價鉻陽極氧化

Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys; German and English version prEN 4827:2020

航天系列-六價無鉻底漆陽極電沉積

Aerospace series - Anodic electrodeposition of hexavalent chromium free primer; German and English version prEN 4868:2021 / Note: Date of issue 2021-06-18*Intended as replacement for DIN EN 4868 (2019-12).

油漆和清漆 防護涂料系統對鋼結構件的防腐蝕保護 第5部分：防護涂料系統（草案）

Corrosion protection of structural steel components by paint and varnish protective coating systems Part 5: Protective coating systems (draft)

油漆和清漆 防護涂料系統對鋼結構件的防腐蝕保護 第5部分：防護涂料系統（草案）

Corrosion protection of structural steel components by paint and varnish protective coating systems Part 5: Protective coating systems (draft)

涂裝油漆和相關產品前鋼基材的準備 表面清潔度的目視評定 第3部分：焊縫、邊緣和其他有表面缺陷的區域的準備等級 (ISO/DIS 8501-3:2024)

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO/DIS 8501-3:2024); German and Engli...

電力金具通用技術條件

General technical requirements for electric power fittings

黑色塑料PVC或PE壓力敏感防銹膠帶

Black plastic PVC or PE pressure sensitive anti-rust tape

環境試驗 第2-11部分:測試 測試Ka:鹽霧

Environmental testing - Part 2-11: Tests - Test Ka: Salt mist

色漆和清漆.防護漆體系對鋼結構的腐蝕防護.第3部分:設計內容

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations

石油和天然氣工業，包括低碳能源 — 海上平臺和陸上工廠的管道系統 — 第 2 部分：材料

Oil and gas industries including lower carbon energy — Piping systems on offshore platforms and onshore plants — Part 2: Materials

石油, 石化和天然氣工業. 鋼儲罐內涂層和內襯

Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks

緊固件. 術語. 第2部分: 鍍層詞匯和術語

Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings

二氧化碳捕獲、運輸和地質儲存. 地質儲存

Carbon dioxide capture, transportation and geological storage - Geological storage

人造空氣的腐蝕試驗.鹽霧試驗

Corrosion tests in artificial atmospheres - Salt spray tests

人造大氣中的腐蝕試驗 - 鹽霧試驗

Corrosion tests in artificial atmospheres — Salt spray tests

金屬和合金的腐蝕.使用消毒劑時的金屬腐蝕防護概述

Corrosion of metals and alloys — Overview of metal corrosion protection when using disinfectants

頁巖氣 采集氣系統腐蝕防護技術規范

Shale Gas Production System Corrosion Protection Technical Specification

鍍鎘

CADMIUM PLATING

電鍍，鋅鎳合金

Plating, Zinc-Nickel Alloy

粉末涂料

Powder Coating Material

鑄鐵管、配件和附件 鑄鐵管和配件有機內襯的要求和試驗方法 第2部分：熱塑性酸改性聚烯烴（TMPO）管內襯

Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes

航空系列 基于三價鉻的化學轉化涂層（用于鋁及鋁合金）

Aerospace series - Trivalent chromium based chemical conversion coatings for aluminium and aluminium alloys

航空航天系列鋁和鋁合金的無六價鉻陽極氧化

Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys

涂料和清漆 鋼結構的防腐保護 第5部分：防護涂料系統（ISO 12944-5:2019）

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2019)

海上運輸工具設備照明的補充要求

UL Standard for Safety Supplemental Requirements for Luminaires for Installation on Marine Vessels

空間產品保證 腐蝕

Space product assurance - Corrosion (Endorsed by Asociación Espa?ola de Normalización in February of 2019.)

油漆和清漆 通過防護涂料系統對鋼結構進行腐蝕防護 第5部分：防護涂料系統

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2019)

鋅涂層 結構中鋼鐵防腐蝕指南和建議 第1部分：設計和耐腐蝕性的一般原則

Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)

熱噴涂 鋅、鋁及其合金 第2部分：腐蝕防護系統的執行

Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)

防止冷水和冷卻回路損壞

Prevention of damage in cold and cooling water circuits