驗證鋼棒中合金元素含量的測試流程，包括稀土總量、雜質含量和水分的測定方法。該分析過程需采用標準化技術手段，確保材料成分數據的準確性和可靠性。
| 標準號 & 類別 | 標準名稱 | 發布 |
|---|---|---|
| ASTM A800/A800M-20 試驗 |
Standard Practice for Estimating Ferrite Content of Stainless Steel Castings Containing Both Ferrite and Austenite
|
2020-05-01 美國材料與試驗協會 |
| ASTM B1027-24 指南 |
Standard Guide for Obtaining a Representative Sample of Copper and Copper Alloy in Particulate Form for Analysis
原子發射光譜法 |
2024-07-01 美國材料與試驗協會 |
| ASTM B444-23 規范/規程 |
Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloys
機械性能測試 |
2023-07-01 美國材料與試驗協會 |
| ASTM B72-72 規范 |
Fire casting copper
|
1972 美國材料與試驗協會 |
| ASTM B752/B752M-22 規范 |
Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
|
2022-04-01 美國材料與試驗協會 |
| ASTM B880-24 規范 |
鎳 鎳合金和鈷合金化學檢查分析限制的一般要求標準規范 Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
鈷合金 |
2024-11-01 美國材料與試驗協會 |
| ASTM B985-24 試驗/規范 |
成分分析用鋁錠、鋼坯、鑄件和成品或半成品鍛造鋁制品取樣的標準規程 Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis
鋁材 |
2024-07-01 美國材料與試驗協會 |
| ASTM E1086-22 試驗 |
Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
火花原子發射光譜法 |
2022-08-15 美國材料與試驗協會 |
| ASTM E1277-22 試驗 |
電感耦合等離子體原子發射光譜法分析鋅-5%鋁混合稀土合金的標準試驗方法 Standard Test Method for Analysis of Zinc-5?% Aluminum-Mischmetal Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry
鋅鋁合金 |
2022-11-15 美國材料與試驗協會 |
| ASTM E1277-23 試驗 |
電感耦合等離子體原子發射光譜法分析鋅-5%鋁混合稀土合金的標準試驗方法 Standard Test Method for Analysis of Zinc-5?% Aluminum-Mischmetal Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry
|
2023-04-01 美國材料與試驗協會 |
| ASTM E1806-18 試驗規范 |
用于測定化學成分的取樣鋼和鐵的標準實施規程 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
鐵 |
2018-03-15 美國材料與試驗協會 |
| ASTM E2823-17 試驗 |
通過電感耦合等離子體質譜法分析鎳合金的標準測試方法（基于性能） Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
|
2017-01-01 美國材料與試驗協會 |
| ASTM E3047-22 試驗 |
Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry
火花原子發射光譜法 |
2022-12-01 美國材料與試驗協會 |
| ASTM E32-21 試驗 |
Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
鐵合金 |
2021-05-01 美國材料與試驗協會 |
| ASTM E55-23 試驗/規范 |
用于測定化學成分的可鍛有色金屬和合金取樣的標準實施規程 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
|
2023-06-01 美國材料與試驗協會 |
| BS EN 10263-2:2017 規范 |
冷鐓和冷擠壓用鋼棒、棒材和線材 冷加工后不進行熱處理的鋼的交貨技術條件 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels not intended for heat treatment after cold working
機械性能測試 |
2017-11-17 英國標準學會 |
| GB/T 1549-2008 試驗/規范 |
Chemical analysis methods of glass,glass marble and vitreous fiber
精密度 |
2008-06-30 國家質檢總局 |
| GB/T 17432-2012 試驗 |
Methods for sampling for analyzing the chemical composition of wrought aluminum and aluminum alloys
試樣制備 |
2012-12-31 國家質檢總局 |
| GB/T 19356-2003 CP |
Thermal spraying-Powders-Composition and technical supply conditions
|
2003-10-29 國家質檢總局 |
| GB/T 24514-2009 試驗/規范 |
鋼表面鋅基和(或)鋁基鍍層單位面積鍍層質量和化學成分測定.重量法、電感耦合等離子體原子發射光譜法和火焰原子吸收光譜法 Zinc and/or aluminium based coatings on steel.Determination of coating mass per unit area and chemical composition.Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
|
2009-10-30 國家質檢總局 |
| GB/T 2526-2020 規范 |
Gadolinium oxide
|
2020-11-19 國家質檢總局 |
| GB/T 28883-2012 試驗 |
Composite seamless steel tubes for pressure
|
2012-11-05 國家質檢總局 |
| GB/T 28898-2012 規范 |
Evaluation of uncertainty in chemical composition analysis for metallurgical materials
|
2012-11-05 國家質檢總局 |
| GB/T 34640.1-2017 規范 |
Classification and recycling and utilization of wrought aluminium and aluminium alloy scraps—Part 1：Classification of scraps
變形鋁 |
2017-09-29 國家質檢總局 |
| GB/T 38941-2020 規范 |
Superalloy rods for powders atomized by plasma rotating electrode process
|
2020-06-02 國家質檢總局 |
| GB/T 42091-2022 |
Specification of smelting and casting of vacuum ingot for heavy steel forgings
|
2022-12-30 國家質檢總局 |
| GB/T 5216-2004 CP |
Structural steels subject to end-quench hardenability requirements
|
2004-01-19 國家質檢總局 |
| GB/T 5239-2015 試驗/規范 |
Praseodymium oxide
|
2015-09-11 國家質檢總局 |
| GB/T 699-1999(XG1-2001) 規范 |
Relative humidity tables for environmental test
力學性能測試 |
2001 國家質檢總局 |
| GJB 163B-2020 規范 |
Specification for high-quality carbon steel for deep drawing
|
2020-06-18 國家軍用標準-總裝備部 |
| HG/T 4858-2015 試驗 |
Analytical method of chemical composition in palladium-carbon catalyst for purified terephthalic acid
對苯二甲酸 |
2015-07-29 行業標準-化工 |
| ISO 1927-3:2012 試驗方法標準 |
Monolithic (unshaped) refractory products - Part 3: Characterization as received
|
2012-12 國際標準化組織 |
| ISO 8458-3:2002/Cor 1:2003 規范 |
彈簧鋼絲.第3部分:油淬火和回火鋼絲 技術勘誤表1 Steel wire for mechanical springs — Part 3: Oil-hardened and tempered wire
|
2002-10-15 國際標準化組織 |
| ISO/TR 9769:2018 試驗 |
Steel and iron — Review of available methods of analysis
原子吸收光譜 |
2018-12-13 國際標準化組織 |
| JC/T 873-2024 試驗 |
Methods of chemical analysis for feldspar
|
2024-10-24 行業標準-建材 |
| JIS G 3441:2021 規范 |
Alloy steel tubes for machine purposes
|
2021-02-22 日本工業標準調查會 |
| SAE AMS4396G-2024 規范標準 |
鎂合金焊絲 3.2 稀土 2.5Zn 0.72Zr (EZ33A) Magnesium Alloy Welding Wire, 3.2 Rare Earths - 2.5Zn - 0.72Zr (EZ33A)
鎂合金焊接絲 |
2024-04-09 美國機動車工程師協會 |
| SAE AMS4490K-2017 規范標準 |
鎂合金鑄件 Die 9.0Al 0.70Zn（AZ91D Temper F）As Cast（UNS M11916） Magnesium Alloy Castings@ Die 9.0Al - 0.70Zn (AZ91D@ Temper F) As Cast (UNS M11916)
|
2017-05-01 美國機動車工程師協會 |
| T/ACREI CREIS54002-2018 規范 |
稀土產品成分分析質量控制技術規范—第2部分·單一稀土金屬及其氧化物成分分析 Specification of quality control for chemical analysis of rare earth products —Part 2： Chemical analysis of individual rare earth metals and oxides
稀土金屬 |
2017-04-24 中國團體標準 |
| UNE-EN 1753:2020 規范/規程 |
Magnesium and magnesium alloys - Magnesium alloy ingots and castings
力學性能測試 |
2020-10-07 西班牙標準化協會 |
Copyright ?2007-2025 ANTPEDIA, All Rights Reserved
京ICP備07018254號 京公網安備1101085018 電信與信息服務業務經營許可證：京ICP證110310號
頁面更新時間: 2025-07-04 14:54