石油、石化和天然氣工業 與石油和天然氣生產相關的介質接觸的非金屬材料 第1部分：熱塑性塑料（ISO 23936-1:2009MOD）

Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production, Part 1: Thermoplastics (ISO 23936-1:2009, MOD)

沖洗閥和噴嘴 用于衛生潔具、小便器及水箱

Flushometers and nozzles for sanitary ware, urinals and cisterns

玻璃纖維增強熱固性樹脂污水管和工業壓力管的標準規范

Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

捆扎、扁鋼和密封件的標準規范

Standard Specification for Strapping, Flat Steel and Seals

廢水系統用帶承插口的直縫焊接不銹鋼管道和管件 - 第1部分：要求、測試、質量控制

Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 1 : Requirements, testing, quality control

軌道交通.軸套.性能測試

Railway applications. Axleboxes. Performance testing

建筑物中工作壓力高達 0.5 bar 的燃氣用不銹鋼柔韌波紋管套件

Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar

差壓（類型）測量儀表與法蘭式截止裝置之間的配合尺寸，最高可達 413 bar (41.3 MPa)

Mating dimensions between differential pressure (type) measuring instruments and flanged - on shut - off devices up to 413 bar (41,3 MPa)

彈性密封圈 水和排水應用管接頭密封用材料要求 第2部分：熱塑性彈性體

Elastomeric seals - Requirements for materials used to seal pipe joints for water and drainage applications - Part 2: Thermoplastic elastomers

筆系統 醫用筆式注射器密封件

Pen systems. Seals for pen-injectors for medical use

彈性密封件 給水和排水應用中使用的管接頭密封材料的要求 熱塑性彈性體

Elastomeric seals. Requirements for materials for pipe joint seals used in water and drainage applications. Thermoplastic elastomers

公路車輛 液壓系統用非石油基制動液規范

Road vehicles. Specification of non-petroleum-based brake fluids for hydraulic systems

液壓流體動力 采用分體式或一體式法蘭夾和公制或英制螺釘的法蘭連接 適用于 42 MPa(420bar)、DN 13 至 DN 76 壓力的法蘭連接器、端口和安裝表面

Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws. Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76

杠桿操作非潤滑旋塞式燃氣截止閥

Lever operated non-lubricated plug type gas shut-off valves

汽油和其他石油燃料的便攜式儲罐

Portable tanks for gasoline and other petroleum fuels

沖洗閥和噴嘴用于衛生潔具、小便池和水箱

Flushometers and nozzles for sanitary ware, urinals and cisterns

用于排水溝和下水道的陶瓷粘土管道系統 - 管道接頭的修復

Vitrified clay pipe systems for drains and sewers - Rehabilitation of pipe joints

工業閥門 化學和石化過程工業閥門 要求和試驗（草案）

Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests

用于燃氣器具和設備的密封件和隔膜用橡膠材料

Rubber materials for seals and diaphragms for gas appliances and gas equipment

用于燃氣器具和燃氣設備的密封件和隔膜的橡膠材料（包括修正案：2023）

Rubber materials for seals and diaphragms for gas appliances and gas equipment (includes Amendment :2023)

燃氣器具和燃氣設備的密封件和隔膜用橡膠材料

Rubber materials for seals and diaphragms for gas appliances and gas equipment; German version EN 549:2019+A1:2023 / Note: This standard is part of the DVGW body of rules.

燃氣器具和燃氣設備密封件和隔膜用橡膠材料

Rubber materials for seals and diaphragms for gas appliances and gas equipment; German version EN 549:2019+A1:2023+A2:2024

筆式系統 第2部分：醫用筆式注射器的活塞止動器

Pen systems - Part 2: Plunger stoppers for pen-injectors for medical use

筆式系統 第3部分：醫療用筆式注射器的密封件

Pen systems - Part 3: Seals for pen-injectors for medical use

用于非石油基液壓制動液的汽車液壓制動缸用的彈性體皮碗和密封圈

Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid

射頻連接器 第1部分:總規范 一般要求和試驗方法

Radio-frequency connectors.Part 1:Generic specification.General requirements and measuring methods

船用數字液壓缸

Marine digital hydraulic cylinder

燃料電池電動汽車加氫口

Hydrogen fuel cell electric vehicle refueling receptacle

液壓傳動 密封裝置 評定液壓往復運動密封件性能的試驗方法

Hydraulic fluid power.Sealing devices.Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications

全斷面隧道掘進機用橡膠密封件

Rubber seals used for full face tunnel boring machine

液壓傳動連接 測壓接頭 第2部分：可帶壓連接式

Connections for hydraulic fluid power—Couplings for diagnostic purposes—Part 2: Coupling for connection under pressure

車用高壓儲氫氣瓶組合閥門

Combination valve for high-pressure hydrogen storage cylinders for vehicles

插入式耳機的乳頭狀接頭

Nipples for insert earphones

針頭系列. 第1部分: 醫用針頭注射器用玻璃套筒

Pen systems - Part 1: Glass cylinders for pen-injectors for medical use

筆系統.第3部分:醫用筆式注射器密封件

Pen systems — Part 3: Seals for pen-injectors for medical use

彈性密封件.輸送氣體燃料和烴類流體的管道和配件用密封件的材料要求

Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids

氣壓傳動.連接.端口和螺柱端

Pneumatic fluid power — Connections — Ports and stud ends

道路車輛.混合燃料補充連接器.修改件1

Road vehicles - Blended fuels refuelling connector; Amendment 1

工具接口用介質傳輸裝置.第2部分:符合ISO 26623系列的多邊形錐度接口用傳輸裝置

Medium-transfer units for tool interfaces — Part 2: Transfer units for polygonal taper interfaces in accordance with the ISO 26623 series

彈性密封件.水和排水用管接頭密封件材料要求.熱塑性彈性體

Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers

液壓動力系統.O形密封圈.第2部分:通用外殼尺寸

Fluid power systems - O-rings - Part 2: Housing dimensions for general applications

液壓傳動.缸筒.往復式應用件中單動式活塞和活塞桿密封溝槽的尺寸和公差

Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications

液壓傳動.40MPa, DN 25至80壓力下使用的四螺栓整體方法蘭

Hydraulic fluid power - Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80

注射用和制藥裝置用彈性體零件第5部分:功能要求和試驗

Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing

O型密封圈.第2部分:外殼尺寸規格

O-Rings -- Part 2: Housing dimensions and sizes

組合彈性密封元件的旋轉軸唇型密封件.第1部分:標稱尺寸和公差

Rotary shaft lip-type seals incorporating elastomeric sealing elements.Part 1: Nominal dimensions and tolerances

汽車部件.使用非石油基液壓制動液的液壓制動缸用橡膠皮碗

Automotive parts -- Rubber cups for hydraulic braking cylinders using a non-petroleum base hydraulic brake fluid

使用彈性體進行長壽命設計

Designing for Long Life with Elastomers

丁二烯丙烯腈（NBR）橡膠 石油基液壓油 55 65

Butadiene Acrylonitrile (NBR) Rubber Petroleum-Base Hydraulic Fluid Resistant 55 - 65

丁基（IIR）橡膠磷酸酯常駐 85 95

Butyl (IIR) Rubber Phosphate Ester Resident 85 - 95

乙丙（EPM）橡膠 耐磷酸酯 55 65

Ethylene Propylene (EPM) Rubber Phosphate Ester Resistant 55 - 65

彈性體：碳氟化合物（FKM）飛機發動機油、燃料和液壓流體耐低溫密封 Tg -40°F（-40°C）/70 至 80 硬度，適用于飛機發動機油、燃料和液壓系統中的產品

Elastomer: Fluorocarbon (FKM) Aircraft Engine Oil, Fuel and Hydraulic Fluid Resistant Low Temperature Sealing Tg -40 °F (-40 °C) / 70 to 80 Hardness, for Products in Aircraft Engine Oil, Fuel, and Hydraulics Systems

環、密封件、硅橡膠 低釋氣、空間和真空服務 45 55

RINGS, SEALING, SILICONE RUBBER Low Outgassing, Space and Vacuum Service 45 - 55

地面支持設備液壓系統、設計和安裝，推薦做法

Ground Support Equipment Hydraulic Systems, Design and Installation, Recommended Practices for

耦合組件，無螺紋，柔性，自鎖，固定腔，高導電性，自粘合，零件規格

Coupling Assembly, Threadless, Flexible, Self-Locking, Fixed Cavity, High Conductivity, Self-Bonding, Part Specification

軸承，球，機身，減摩，通用標準

Bearings, Ball, Airframe, Antifriction, General Standard for

由 AMS3650 材料加工而成的 O 型圈

O-Ring Machined from AMS3650 Material

耐低水位的制動液

Low Water Tolerant Brake Fluids@ Recommended Practice

燃氣器具和燃氣設備的密封件和隔膜用橡膠材料

Rubber materials for seals and diaphragms for gas appliances and gas equipment

燃氣器具和燃氣設備的密封件和隔膜用橡膠材料

Rubber materials for seals and diaphragms for gas appliances and gas equipment

彈性密封件 輸送氣體燃料和碳氫化合物流體的管道和配件中使用的密封件的材料要求（ISO 16010:2019 IDT）

Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids (ISO 16010:2019, IDT)

彈性密封件 水和排水應用中管件密封所用材料的要求 熱塑性彈性體（ISO 23711:2022 等同）

Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers (ISO 23711:2022, IDT)

叉車驅動橋

Fork-lift trucks—Drive axle

防火防煙安全戶門

Fire and smoke resistant and security doorsets

燃氣用埋地聚乙烯(PE)閥門

Buried polyethylene(PE) valve for the supply of gaseous fuels

UL汽油和汽油/乙醇混合燃料的名義乙醇濃度高達85%用軟管噴嘴閥安全標準(E0 - E85)

UL Standard for Safety Hose Nozzle Valves for Gasoline and Gasoline/ Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 ?C E85)

標稱乙醇濃度高達 85%（E0 E85）的汽油和汽油/乙醇混合物安全儀表的 UL 標準

UL Standard for Safety Meters for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85)

柴油燃料 生物柴油燃料 柴油/標稱生物柴油濃度高達 20%（B20） 煤油 和燃料油的柴油/生物柴油混合物的 UL 標準

UL Standard for Safety Meters for Diesel Fuel Biodiesel Fuel Diesel/ Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20) Kerosene and Fuel Oil

對柴油燃料 生物柴油燃料 柴油/生物柴油混合伴有濃度小于等于20%標稱生物柴油濃縮物(B20) 煤油和燃料油用動力泵調查的概述

Outling of investigation for Power-operated pumps for diesel fuel,biodiesel fuel,diesel/biodiesel blends with nominal biodiesed concentrations up to 20 percent(B20),kerosene, and fuel oil

汽油和標稱生物柴油濃度高達85% (E0-E85) 的汽油/乙醇混合燃料用閥門的UL安全標準

UL Standard for Safety Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 ?C E85)

燃氣器具和燃氣設備的密封件和隔膜用橡膠材料

Rubber materials for seals and diaphragms for gas appliances and gas equipment

燃氣器具和燃氣設備的密封件和隔膜用橡膠材料

Rubber materials for seals and diaphragms for gas appliances and gas equipment