產品幾何規格 (GPS) 尺寸測量設備 卡尺的設計和計量特性

Geometrical product specifications (GPS). Dimensional measuring equipment - Design and metrological characteristics of callipers

電動工具 粉塵測量程序 手持刨床的特殊要求

Electric motor-operated tools. Dust measurement procedure - Particular requirements for hand-held planers

固結磨具產品 尺寸 用于固定機器上的去毛刺和修整/勾絲的砂輪

Bonded abrasive products. Dimensions - Grinding wheels for deburring and fettling/snagging on stationary machine

固結磨具產品 尺寸 高壓磨削用砂輪

Bonded abrasive products. Dimensions - Grinding wheels for high-pressure grinding

管道與設備阻抗加熱的一般要求、試驗、標識和文件

IEEE/CSA Standard for Impedance Heating of Pipelines and Equipment—General, Testing, Marking, and Documentation Requirements

屬性的表格布局 - 第 192 部分：定位元素

Tabular layouts of properties - Part 192: Positioning elements

木工機械 安全 第15部分：壓力機（ISO/DIS 19085-15:2018）

Woodworking machines - Safety - Part 15: Presses (ISO/DIS 19085-15:2018); German and English version prEN ISO 19085-15:2018

色漆和清漆 電沉積涂層 第1部分：詞匯（草案）

Electrodeposited coatings of paints and varnishes Part 1: Glossary (draft)

固結磨料產品 尺寸 第14部分：角磨機上用于去毛刺和修整/勾絲的砂輪

Bonded abrasive products - Dimensions - Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder (ISO/DIS 603-14:2021); Text in German and English / Note: Date of issue 2021-04-23*Intended as replacement for DIN ISO 603-14 (2000...

涂裝作業安全術語

Safety terms for painting operations

產品幾何技術規范(GPS) 工件與測量設備的測量檢驗 第1部分：按規范驗證合格或不合格的判定規則

Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 1:Decision rules for verifying conformity or nonconformity with specifications

綠色制造.干式切削.通用技術指南

Green manufacturing.Dry cutting.The general technique guideline

固結磨具.尺寸.第4部分:平面磨削用周邊磨砂輪

Bonded abrasive products.Dimensions.Part 4:Grinding wheels for surface grinding/peripheral grinding

固結磨具.尺寸.第6部分:工具磨和工具室用砂輪

Bonded abrasive products.Dimensions.Part 6:Grinding wheels for tool and tool room grinding

弧焊設備第13部分:焊接回流夾

Arc welding equipment - Part 13: Welding current return clamp

管道和設備阻抗加熱 IEEE/CSA 標準 一般、測試、標記和文檔要求

IEEE/CSA Standard for Impedance Heating of Pipelines and Equipment - General, Testing, Marking, and Documentation Requirements

產品幾何量技術規范(GPS).通過工件測量進行檢驗及測量設備.第1部分:判定是否符合技術要求的規則

Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 1: Decision rules for proving conformance or nonconformance with specifications

單個齒輪測量儀器的評價.第1部分:齒輪形狀工藝方法

Evaluation of instruments for the measurement of individual gears -- Part 1: Method by gear shape artifacts

粘結磨料產品 尺寸 第8部分：固定機器上去毛刺和修整/打磨用砂輪

Bonded abrasive products - Dimensions - Part 8 : grinding wheels for deburring and fettling/snagging on stationary machine

粘結磨料產品 尺寸 第9部分：高壓磨削用砂輪

Bonded abrasive products - Dimensions - Part 9 : grinding wheels for high-pressure grinding

粘結磨料產品 尺寸 第8部分：固定機器上去毛刺和修整/打磨用砂輪

Bonded abrasive products - Dimensions - Part 8 : grinding wheels for deburring and fettling/snagging on stationary machine

粘結磨料產品 尺寸 第9部分：高壓磨削用砂輪

Bonded abrasive products - Dimensions - Part 9 : grinding wheels for high-pressure grinding

手持非電動工具 安全要求 第13部分：緊固件驅動工具（ISO 11148-13:2017）

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)

工業自動化系統和集成 物理設備控制 計算機數字控制的數據模型 第17部分：增材制造工藝數據（等同采用ISO 14649-17:2020）

Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers - Part 17: Process data for additive manufacturing (ISO 14649-17:2020, IDT)

切削和磨削中的基本量 第5部分:使用砂輪磨削工藝的基本術語(ISO 3002-5:1989,IDT)

Basic quantities in cutting and grinding — Part 5: Basic terminology for grinding processes using grinding wheels (ISO 3002-5:1989, IDT)

固結磨料產品 尺寸 第8部分：固定式機器去毛刺和修整/勾除用的砂輪（ISO 603-8:2024 等同采用）

Bonded abrasive products — Dimensions — Part 8: Grinding wheels for deburring and fettling/snagging on stationary machine (ISO 603-8:2024, IDT)

磨削用結合磨料產品 尺寸 第9部分：高壓磨削砂輪（ISO 603-9:2024 等同）

Bonded abrasive products — Dimensions — Part 9: Grinding wheels for high-pressure grinding (ISO 603-9:2024, IDT)

數控冷輾環機

NC cold rolling machine for rings

產品技術文檔(TPD)減壓槽 類型和尺寸

Technical product documentation (TPD) - Relief grooves - Types and dimensioning (ISO 18388:2016) (Endorsed by Asociación Espa?ola de Normalización in November of 2019.)