共找到 150 條與 三相點 相關的標準，共 10 頁
This guide describes a procedure for placing a water triple-point cell in service and for using it as a reference temperature in thermometer
Standard Guide for Use of Water Triple Point Cells
This guide describes a procedure for placing a water triple-point cell in service and for using it as a reference temperature in thermometer
Standard Guide for Use of Water Triple Point Cells
This guide describes a procedure for placing a water triple-point cell in service and for using it as a reference temperature
Standard Guide for Use of Water Triple Point Cells
1.1 This guide covers the nature of two commercial water triple-point cells (types A and B, see Fig. 1) and provides a method for preparing
Standard Guide for Use of Water Triple Point Cells
1.1 This guide covers the nature of two commercial water triple-point cells (types A and B, see Fig. 1) and provides a method for preparing the cell
Standard Guide for Use of Water Triple Point Cells
Standard guide for use of water triple point cells.
This guide covers the nature of two commercial water triple-point cells (types A and B, see Fig. 1) and provides a method for preparing the cell
Standard guide for use of water triple point cells.
State system for ensuring the uniformity of measurements. Standard reference data. Liquid water thermiophysical properties conditioned by the pressure at triple point up to 0,3 MPa over the temperature range from 0 °С to 100 °С
本規范適用于-189.3442℃～961.78℃范圍中用于分度高溫鉑電阻溫度計及標準鉑電阻溫度計的固定點裝置的校準。（以下簡稱固定點裝置）（高溫鉑電阻溫度計及標準鉑電阻溫度計簡稱鉑電阻溫度計
Calibration Specification of Fixed-Point Devices for Standard Platinum Resistance Thermometer
90.188~273.15K temperature reference operation technical specification
本規程適用于-189.3442℃～660.323℃（或各分溫區）工作基準、一等和二等標準鉑電阻溫度計的首次檢定和后續檢定
Standard Platinum Resistance Thermometer
273.15~903.89K temperature reference operation technical specification
本規程適用于測量范圍為(-60~300)℃,分度值為0.05℃或0.1℃的標準水銀(含汞基合金)溫度計的首次檢定、后續檢定和使用中檢驗
Verification Regulation of Standard Mercury-in-Glass Thermometers
Verification Regulations for Digital Temperature Meter
Verification Scheme of Temperature Measuring Instruments in the Range from 13.81 to 273.15 K
