共找到 150 條與 小直徑管 相關的標準，共 10 頁
VOID - Small Diameter Tubing For Engine Air/Fluid Systems
This document specifies the dimensions and tolerances of capillary tubes, seamless in heat resisting alloys, diameter 0,6 mm D
Aerospace series - Capillary tubes, seamless, in heat resisting alloys - Diameter 0,6 mm
1.1 This specification covers the requirements for wrought seamless and welded and drawn cobalt alloy small diameter tubing used for the manufacture
Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
Small-bore connectors for liquids and gases in healthcare applications. Part 5. Particular requirements for connectors for limb cuff inflation applications
1.1 This specification covers the requirements for wrought 18chromium-14nickel-2.5molybdenum stainless steel tubing used
Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
1.1 This specification covers the requirements for wrought 18chromium-14nickel-2.5molybdenum stainless steel tubing used for the manufacture
Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
1.1 This specification covers the requirements
Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
1.1 This specification covers the requirements for wrought seamless and welded and drawn cobalt alloy small diameter tubing used
Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
ASTM F2257-14 外科植入物 (UNS S31673) 用鍛造無縫或焊接和拉拔18鉻-14鎳-2.5鉬不銹鋼小直徑管件的標準標準規格
1.1 This specification covers the requirements
Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
ASTM F2257-22 外科植入物 (UNS S31673) 用鍛造無縫或焊接和拉拔18鉻-14鎳-2.5鉬不銹鋼小直徑管件的標準標準規格
1.1 This specification covers the requirements for wrought 18chromium-14nickel-2.5molybdenum stainless steel tubing used for the manufacture
Standard Specification for Wrought Seamless or Welded and Drawn 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
1.1 This specification covers the requirements for wrought seamless and welded and drawn cobalt alloy small diameter tubing used
Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
1.1 This specification covers the requirements for wrought seamless and welded and drawn cobalt alloy small diameter tubing used
Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
本標準規定了余熱鍋爐用管子外徑D|(w)小于、等于60mm,彎曲半徑R小于、等于2D|(w)彎管及蛇形管的制造和驗收。 本標準適用于額定蒸汽壓力不大于3.82 MPa的煙道式及其它類型的余熱鍋爐
Specification for small diameter bending pipe
本標準規定了不銹鋼小直徑無縫鋼管的分類尺寸、外形、重量、技術要求、試驗方法、檢驗規則、包裝、標志及質量證明書。 本標準適用于航空航天、機電、儀器儀表元件、醫用針管等一般用途的奧氏體不銹鋼小直徑無縫鋼管
Stainless steel small diameter seamless steel tubes
本規范規定了HR-1、HR-2抗氫鋼小直徑導管的要求、質量保證規定及交貨準備等。 本規范適用于HR-1、HR-2抗氫鋼小直徑導管（以下簡稱導管）的生產、訂貨和驗收
Specification for hydrogen-resistant steel small diameter tubes
