T/FJSJLXH 001-2023 電子汽車衡示值誤差的快速校準與期間核查方法

      本標準首次提出一種科學高效準確的校準方法。用20噸左右的M1或M12級砝碼作為標準器具，使用企業的空車和重車作為“替代物”，3噸叉車作為輔助設備，可以快速準確對（50~150）噸電子汽車衡的各秤量點（500 

Rapid calibration and intermediate checks of indication errors in electronic truck scales

UNE-EN 27963:1993 鋼焊縫 用于焊縫超聲波檢查的 2 號校準塊 （ISO 7963：1985）

WELDS IN STEEL. CALIBRATION BLOCK No 2 FOR ULTRASONIC EXAMINATION OF WELDS. (ISO 7963:1985).

JJF 2102-2024 X射線安全檢查計算機斷層成像裝置（CT）校準規范

Calibration specifications for computed tomography equipment (CT) for X-ray safety inspections

SAA/SNZ HB 86.1:1996 工業測量儀器的選擇、維護、校準和檢查指南 一般原則

A guide to the selection, care, calibration and checking of measuring instruments in industry - General principles

PP 57-2006 建立和執行設備校準 標準化 和檢查要求的標準實踐

Standard Practice for Establishing Requirements for and Performing Equipment Calibrations@ Standardizations@ and Checks

HB 86.1-1996 工業測量工具的選擇，保養，校準和檢查導則．一般原則

This Handbook is written for the users of measuring equipment in industry. It sets out to explain measurement and measuring instruments

A guide to the selection, care, calibration and checking of measuring instruments in industry - General principles

AASHTO PP 57-2006(R2009 建立和執行設備校準、標準化和檢查要求的標準實踐

Standard Practice for Establishing Requirements for and Performing Equipment Calibrations, Standardizations, and Checks

AS Z43.2:1970 聽力檢查儀器 第2部分：純音聽力計校準的參考零點

Instrumentation for audiometry, Part 2: Reference zero for the calibration of pure tone audiometers

PUB NO 175-1995 EEMUA 校準和檢查過程分析儀操作規范（以前的 IP 代碼 340）

This code is a general guide to the principles and methods used for calibrating and checking process analysers. It covers initial calibration

EEMUA Code of Practice for Calibration and Checking Process Analysers (Formerly IP Code 340)

TCVN 5873-1995 鋼中的焊縫.用于超聲波檢查的設備校準用參考試塊

Welds in steel.Reference block for the calibration of equipment for ultrasonic examination

TR 25-04 對認可設施中使用的設備進行校準和中間檢查的準則

Calibration, Testing, Verification, Repair, Medical, Certification, Inspection, Blood Transfusion, Pharmaceutical, Reference Material Producers

Criteria for Performing Calibration and Intermediate Checks on Equipment used in Accredited Facilities

BH GSO ISO 6143:2016 氣體分析 確定和檢查校準氣體混合物成分的比較方法

Gas analysis -- Comparison methods for determining and checking the composition of calibration gas mixtures

DANSK DS/EN ISO 6143:2006 氣體分析 確定和檢查校準氣體混合物成分的比較方法

SAME AS ISO 6143

Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures

DLA SMD-5962-87543 REV C-2009 微電路，數字，雙極，九輸入奇偶校驗檢查器/發生器，單片硅

MICROCIRCUIT, DIGITAL, BIPOLAR, NINE-INPUT PARITY CHECKER/GENERATOR, MONOLITHIC SILICON

ISO/DIS 6143:2023 氣體分析 確定和檢查校準氣體混合物成分的比較方法

確定氣體混合物組成的方法； 計算校準氣體混合物成分相對于所用參考氣體混合物已知不確定性的不確定性； 通過與適當?shù)膮⒖細怏w混合物進行比較來檢查分配給校準氣體混合物的組成； 在相似組成的校準氣體混合物套件中執行一致性測試和異常值搜索

Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures