共找到 150 條與 火焰原子化法 相關的標準，共 10 頁
Water analysis - Atomic absorption spectrometry, atomization in flame - Special guidelines for sodium and potassium
Atomic absorption spectrometry, atomization in flame - Special guidelines for aluminium, lead, iron, cadmium, cobalt, copper, chromium, manganese, nickel and zinc
本標準規定了鐵和鋼中釩含量的原子吸收光譜測定法。該方法適用于0.005%（質量分數）及以上至1.0%的鐵和鋼中釩的定量分析，但不適用于含有1.0%或更多鎢和/或0.5%或更多鈦的試樣
Iron and steel -- Atomic absorption spectrometric method -- Part 7: Determination of vanadium -- Flame atomization after decomposition with acids
此標準規定了鐵和鋼中鉬含量的原子吸收光譜法測定方法。適用于0.01％或以上至不超過1.0％的鉬質量分數測定
Iron and steel -- Atomic absorption spectrometric method -- Part 5: Determination of molybdenum -- Flame atomization after decomposition with acids
Iron and steel -- Atomic absorption spectrometric method -- Part 8: Determination of cobalt -- Flame atomization after decomposition with acids
本標準規定了鐵和鋼中銅含量的原子吸收分光法測定方法。該方法適用于銅含量（質量分數）為0.003%或以上至1.0%以下
Iron and steel.Atomic absorption spectrometric method.Part 6: Determination of copper .Flame atomization after decomposition with acids
Iron and steel -- Atomic absorption spectrometric method -- Part 9: Determination of titanium -- Flame atomization after decomposition with acids
本標準規定了鐵和鋼中錳含量的原子吸收光譜法測定方法。該方法適用于錳含量（質量分數）為0.003%或以上的樣品，最高可達2.0
Iron and steel -- Atomic absorption spectrometric method -- Part 1: Determination of manganese -- Flame atomization after decomposition with acids
本標準規定了一種原子吸收分光光度法，用于測定鐵和鋼中鎂的含量。方法適用于0.001%至包括0.10%（質量分數）范圍內鎂的測定
Iron and steel -- Atomic absorption spectrometric method -- Part 13: Determination of magnesium -- Flame atomization after decomposition with acids
Iron and steel -- Atomic absorption spectrometric method -- Part 3: Determination of nickel -- Flame atomization after decomposition with acids
本標準規定了用于測定鋼鐵中鈣含量的原子吸收光譜法。該方法適用于鈣含量（質量分數）為$0.0005\%$或更高至包括$0.010\%$的情況
Iron and steel -- Atomic absorption spectrometric method -- Part 14: Determination of calcium -- Flame atomization after decomposition with acids
本標準規定了鐵和鋼中鉻含量的測定的原子吸收光譜法。該方法適用于測定質量分數為0.002%及以上至包括2.0%的鉻含量。 注：對應的國際標準及其等效程度符號如下所示，ISO 10138:1991（鋼鐵中鉻含量火焰原子吸收光譜法）（MOD
Iron and steel -- Atomic absorption spectrometric method -- Part 4: Determination of chromium -- Flame atomization after decomposition with acids
本標準規定了一種使用酸分解后的火焰原子吸收光譜法測定鋼鐵中鋅含量的方法。適用于確定質量分數在0.005%或以上（包括最高0.025%）的樣品中的鋅含量
Iron and steel -- Atomic absorption spectrometric method -- Part 15: Determination of zinc -- Section 1: Flame atomization after decomposition with acids
Iron and steel.Atomic absorption spectrometric method.Part 10: Determination of aluminium.Section 1: Flame atomization after decomposition with acids
Iron and steel -- Atomic absorption spectrometric method -- Part 12: Determination of lead -- Section 2: Flame atomization after extraction of iodide
