共找到 150 條與 誤差指數(shù)(shù) 相關(guān)的標(biāo)準(zhǔn)，共 10 頁
Versione in lingua italiana della norma internazionale ISO 10579 (edizione febbraio 1993). Prescrive le regole per la quotatura e l'indicazione
Technical drawings. Dimensions and tolerancing. Non-rigid-parts.
Stabilisce le tolleranze dimensionali ed i relativi sovrammetalli di lavorazione dei getti di ghisa a grafite sferoidale (vedere UNI 4544), colati
Spheroidal graphite iron sand castings. Deviations in dimensions without tolerance indication and machining allowances.
INDUSTRIAL PRESSURE GAUGES. METALLIC PRESSURE GAUGE INDICATORS. DIFFERENTIAL GAUGES.
This guide shows the basis far the acccpiabiity criterion of ±4 dB for the site attenuation measurementsrequired in ANSI C33.61992
Guide for the Computation of Errors in Open-Area Test Site Measurements
This standard specifies two classes of permitted deviations (due to variability in sawing and processing) from target thicknesses, widths and lengths
Sawn timber used in pallets - Permitted deviations and guidelines for dimensions
Guide to acceptable colour variations in textile floor coverings
Recent regulatory activity related to limiting the concentrations of disinfection byproducts at each point in the distribution system is increasing
Chloramination — Rules and Guidance — Variations from State to State
Geometrical Product Specification (GPS) - Geometrical Tolerance - Specified References and Specified Reference Systems
This guide shows the basis for the acceptability criterion of ±4 dB for the site attenuation measurements required in ANSI C63.4-1992
Guide for the computation of errors in open-area test site measurements
INSPECTION OF TOLERANCES OF PLAIN WORKPIECES. INDICATING MEASURING INSTRUMENTS.
La norma specifica un metodo per la determinazione della variazione dell'indice di plasticità (PRI) della gomma grezza naturale
Rubber, raw natural - Determination of plasticity retention index (PRI)
Fundamentals are outlined which may be used in order to comply with the definitions of ISO 1101. The methods described do not provide for a unique
Technical drawings; Geometrical tolerancing; Tolerancing of form, orientation, location and run-out; Verification principles and methods; Guidelines
La norma specifica i metodi per l'indicazione degli scostamenti limite sui disegni di costruzione e del genio civile
Technical product documentation - Construction documentation - Indication of limit deviations
This document specifies methods for the indication of limit deviations on construction documents
Technical product documentation. Construction documentation. Indication of limit deviations
Technical drawings - Geometrical tolerancing - Tolerancing of form, orientation, location and run-out - Verification principles and methods - Guidelines
