共找到 150 條與 識別點 相關的標準，共 10 頁
本標準對航空器和航天器系統中，以適當?shù)臉?biāo)志指示剛性管路組件的功能和管內流體的標志圖形提出要求，但不包括航空發動機上，直接與機身系統連接的管路組件。需要時，本標準也可應用于軟性管路組件。 本標志圖形為日常維修工作提供必要的最低限度的識別標志。 注:依據本標志圖形而使用的標志，不應對管路的化學或
Aerospace pipelines identification
Identification cards ?Integrated circuit cards ?Part 2: Cards with contacts ?Dimensions and location of the contacts
Market Location Identifier Implementation Guide
この規格は,近接型lCカード(以下，PICCという。)とその結合裝置〔以下，PCDという
Identification cards -- Contactless integrated circuit(s) cards -- Proximity cards -- Part 4: Transmission protocol
この規格は，近傍型ICカード(以下，VICCと呼ぶ。)の物理的特性について規定する
Identification cards -- Contactless integrated circuit(s) cards -- Vicinity cards -- Part 1: Physical characteristics
Defines physical characteristics of vicinity cards (VICCs). Applies to identification cards of the card type ID-1 which operates in the vicinity
Identification cards - Contactless integrated circuit(s) cards - Vicinity cards Part 1: Physical characteristics
This powerpoint presentation begins by providing a brief overview of backflow and a West Virginia (WV)water system with a backflow event
Identifying Backflow Hotspots Using Meters and Models
この規格は，近接型ICカード(以下，PICCと呼ぶ。)の物理的特性について規定する。このカードは，近接磁界で結合する素子をカードに內蔵して動作するID-1型(JIS X 6301參照)とする
Identification cards -- Contactless integrated circuit(s) cards -- Proximity cards -- Part 1: Physical characteristics
Identification cards-Integrated circuit(s)cards with contacts-Part 5:Numbering system and registration procedure for application identifiers
Amendment 1 to ISO/IEC 7816-1:1998
Identification cards - Integrated circuit(s) cards with contacts - Part 1: Physical characteristics - Amendment 1: Maximum height of the IC contact surface
Specifies a national numbering system for application identifiers and a registration procedure for application provider identifiers
Identification cards - Integrated circuit(s) cards with contacts - Numbering system and registration procedure for application identifiers
本標準規定應用識別符的編號系統及應用提供者識別符的登錄程序。本標準所述的編號系統，乃針對應用提供者的應用及其相關服務，提供驗證應用及其相關服務所需數據組件的方法。應用識別符（Appliaction identifier’AID）是用來尋址卡片內的應用位置。本標準規定應用識別符的
Identification cards-Integrated circuit(s)cards with contacts-Part 5:Numbering system and registration procedure for application identifiers
This is Amendment 1 to ISO/IEC 7816-1-1998 (Identification cards — Integrated circuit(s) cards with contacts Part1: Physical characteristics
Identification cards - Integrated circuit(s) cards with contacts - Part 1: Physical characteristics; Amendment 1: Maximum height of the IC contact surface
GB/T 16649的本部分規定了電源、信號結構以及集成電路卡與諸如終端這樣的接口設備之間的信息交換。 它還包括信號速率、電壓電平、電流數值、奇偶約定、操作規程、傳輸機制以及與集成電路卡的通信。 它不包括信息和指令的內容，如發卡方和用戶的標識、服務和限制、安全特性、日志和指令定義
Identification cards--Integrated circuit(s) cards with contacts--Part 3: Electronic signals and transmission protocols
Identification cards ?Integrated circuit cards ?Part 3: Cards with contacts ?Electrical interface and transmission protocols
