SAE AMS3329D 彈性體:氟硅橡膠（FVMQ）耐燃油和油 高強度45–55邵氏A硬度 適用于燃油系統/潤滑油產品

Elastomer: Fluorosilicone Rubber (FVMQ), Fuel and Oil Resistant, High Strength, 45 – 55 Shore A Hardness, For Products in Fuel Systems / Lubricating Oils

GM GMP.PVC.025-1999 PVC 塑料溶膠，60 A 型硬度計

PVC - Plastisol, 60 Type A Durometer

SAE AMS3301K 彈性體:硅橡膠(MQ/VMQ) 通用 35-45硬度計“A”型硬度

Elastomer: Silicone Rubber (MQ/VMQ), General Purpose, 35 - 45 Durometer Type ‘A’ Hardness

SAE AMS3303L 彈性體:硅酮 橡膠(MQ/VMQ) 通用 55-65硬度計“A”型硬度

Elastomer: Silicone, Rubber (MQ/VMQ), General Purpose, 55 - 65 Durometer Type “A” Hardness

SAE AMS 3301K-2024 彈性體：硅橡膠 (MQ/VMQ) 通用 35 45 硬度計類型“A”硬度

Elastomer: Silicone Rubber (MQ/VMQ), General Purpose, 35 - 45 Durometer Type 'A' Hardness

GM GMP.E/P.081-2002 邵氏硬度為A70的發動機艙的熱塑性彈性聚烯烴

Thermoplastic Elastomer Polyolefinic, Shore A70, Underhood Applications

GM GMP.TECEA.005-1997 熱塑性彈性體 氯化乙烯合金，內部/外部，邵氏硬度 A77

Thermoplastic Elastomer - Chlorinated Ethylene Alloy, Interior/Exterior, Shore A77

SAE AMS3301K-2024 彈性體：硅橡膠 (MQ/VMQ) 通用 硬度計類型“A”硬度為 35 45

本規范涵蓋了一種可用于制造片狀、條狀、管狀、擠出和模壓形狀產品的硅橡膠（MQ/VMQ）彈性體。本規范不適用于航空和航天應用的模壓環、壓縮密封件、模壓O型圈繩索和模壓到位墊圈。 應用 此類材料具有耐候性和耐石油基潤滑油性能，但其用途不僅限于此類應用。此類材料的典型使用溫度范圍為-85至+400°F

Elastomer: Silicone Rubber (MQ/VMQ), General Purpose, 35 - 45 Durometer Type ‘A’ Hardness

SAE AMS3571/1-1976 聚氨酯澆注樹脂，柔性，固體聚醚型硬度計硬度 45 "A"

This specification covers one type of polyether-type urethane resin and hardener which, when mixed and cured, produce elastomeric polyurethane

POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 45 "A"

SAE AMS3571/4-1976 聚氨酯澆注樹脂，柔性，固體聚醚型硬度計硬度 75 "A"

This specification covers one type of polyether-type urethane resin and hardener which, when mixed and cured, produce elastomeric polyurethane

POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 75 "A"

SAE AMS3571/2-1976 聚氨酯澆鑄樹脂，柔性，固體聚醚型硬度計硬度 55 "A"

This specification covers one type of polyether-type urethane resin and hardener which, when mixed and cured, produce elastomeric polyurethane

POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 55 "A"

SAE AMS3571/3-1976 聚氨酯澆鑄樹脂，柔性，固體聚醚型硬度計硬度 65 "A"

This specification covers one type of polyether-type urethane resin and hardener which, when mixed and cured, produce elastomeric polyurethane

POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 65 "A"

SAE AMS3571/5-1976 聚氨酯澆鑄樹脂，柔性，固體聚醚型硬度計硬度 85 "A"

This specification covers one type of polyether-type urethane resin and hardener which, when mixed and cured, produce elastomeric polyurethane

POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 85 "A"

SAE AMS3571/6-1976 聚氨酯澆鑄樹脂，柔性，固體聚醚型硬度計硬度 95 "A"

This specification covers one type of polyether-type urethane resin and hardener which, when mixed and cured, produce elastomeric polyurethane

POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 95 "A"

GM GMP.E/P.117-2003 熱塑性彈性體聚烯烴合金，邵氏硬度 A70，內飾，整體著色

Thermoplastic Elastomer Polyolefin Alloy, Shore A70, Interior, Integrally Colored