共找到 150 條與 電感耦合等離子體原子發射光譜法 相關的標準，共 10 頁
Scope is not provided for this standard
Steel and iron -- Determination of calcium and magnesium -- Inductively coupled plasma atomic emission spectrometric method
Determination of Trace Elements in Coal by Inductively Coupled Plasma-Atomic Emission Spectrometry
? ??? ??? ? ?? ???? ??? ?? ?? ???? ?? ?? ???? ??
Steel-Determination of manganese content-Inductively coupled plasma atomic emission spectrometric method
耐火材料中次量及微量成分的電感耦合等離子體原子發射光譜(ICP-AES)化學分析方法
Refractory products—Determination by inductively coupled plasma atomic emission spectrometry(ICP-AES)
Determination of hexavalent chromium in coal ash by inductively coupled plasma atomic emission spectrometry
本標準規定了電感耦合等離子體原子發射光譜法測定不銹鋼中硅、錳、磷、鉻、鎳、銅、鈦、鉬、釩、鎢、鋁元素的方法。 本標準適用于鉻不銹鋼、鉻鎳不銹鋼和鉻錳（錳系）不銹鋼中硅、錳、磷、鉻、鎳、銅、鈦、鉬、釩、鎢、鋁元素含量的測定。 本標準規定的鋁、硅為酸溶鋁、酸溶硅
Determination of chemical composition in stainless steel-Inductively coupled plasma atomic emission spectrometric method
Determination of Chromium in Fertilizers by Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES)
本方法借助電熱板使用鹽酸、硝酸混合酸加熱消解樣品，采用電感耦合等離子體原子發射光譜儀（ICP-AES），測定金屬錳中硒元素含量
Manganese metal- Determination of selenium content-Inductively coupled plasma atomic emission spectrometric method
本標準規定了用電感耦合等離子體原子發射光譜法測定銻、錫含量的方法。 本標準適用于鉻含量(質量分數)小于 1.50%,鎳含量(質量分數)小于 2.00% 的碳素鋼、低合金鋼中銻、錫含量的測定,銻的測定范圍(質量分數): 0.0020%~0.12%; 錫的測定范圍(質量分數): 0.0020%~0.13
Iron and steel—Determination of antimony and tin content—Inductively coupled plasma atomic emission spectrometric method
This International Standard specifies an inductively coupled plasma atomic emission spectrometric method for the determination of the mass fraction
Titanium and titanium alloys -- Determination of iron -- Inductively coupled plasma atomic emission spectrometry
Nickel alloys — Determination of molybdenum content —Inductively coupled plasma/atomic emission spectrometric method
? ??? ??? ?? ?? ???? ?? ?? ?? ??? ??? ??? ?? ????
General rules for ICP emission spectrochemical analysis
本文件規定了用電感耦合等離子體原子發射光譜法測定硅含量的方法。 本文件適用于生鐵、鑄鐵、非合金鋼、低合金鋼及合金鋼中質量分數為0.01%~5%的硅含量的測定
Iron, steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method
Nickel alloys — Determination of molybdenum content —Inductively coupled plasma/atomic emission spectrometric method
Cross References: ISO 384:1978 ISO 648:1977 ISO 1042:1998 ISO 3696:1987 ISO 4787:1984
ISO 22962. Titanium and titanium alloys. Determination of iron. Inductively coupled plasma atomic emission spectrometry
