共找到 150 條與 Combustion Tube 相關的標準，共 10 頁
A test portion is desulfonated in concentrated phosphoric acid medium and the liberated alkylbenzene is extracted with light petroleum. The mean
Surface active agents; technical straight-chain sodium alkylbenzenesulfonates; determination of mean relative molecular mass by gas-liquid chromatography
1.1 This specification covers apparatus and basic
Standard Specification for Apparatus For Microdetermination of Carbon and
1.1 This test method covers the determination of sulfur in samples of coal or coke by high-temperature tube furnace combustion. 1.1.1 Two analysis
D4239-Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
1???Scope This document specifies an alternative method of determining the total sulfur mass fraction of coal and coke by high-temperature
Coal and coke. Determination of total sulfur by Coulomb titration method
Tube-Control@ 3/8 O.D.@ and 1/2 O.D.@ Steel (Rev 1)
This International Standard describes a method for determining the sulfur content of pitch used in the production of aluminium. The method
Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method
Elbow@ Bulkhead Universal@ 45 Degree@ Flareless Tube (FSC 4730)
Gives a method of the determination of the total sulfur content of hard coal, brown coal, lignite and coke by a high temperature combustion method
Solid mineral fuels - Determination of total sulfur - High temperature combustion method
This Japanese Industrial Standard specifies the method of quantitative determination of the sulfur content of 1mass ppm to 1 O00 mass ppm in gasoline
Crude oil and petroleum products -- Determination of sulfur content Part 2: Oxidative microcoulometry
本文件規定了通過高溫燃燒-庫侖滴定法測定煤和焦炭中總硫含量的替代方法
Solid mineral fuels. Determination of total sulfur by Coulomb titration method
Solid mineral fuels - Determination of total sulfur - High temperature combustion method
Describes a method determining sulphur after combustion of the test portion in a current of oxygen. Specifies principle, reagents, apparatus, sampling
Steel and cast iron; Determination of sulphur content; Combustion titrimetric method
Adapter@ Flareless Tube@ Bulkhead and Universal to Flared Tube
Applicable to pitches containing between 0.1 and 4.0% (m/m) sulfur
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulfur content
Specifies a gravimetric method after combustion of the test portion in a current of oxygen. The method is applicable to products having carbon
Steel and cast iron; Determination of total carbon content; Combustion gravimetric method
