ZH
KR
JP
ES
RU
DE

standard revision

standard revision, Total:277 items.

In the international standard classification, standard revision involves: Information technology (IT) in general, Electrical engineering in general, Lamps and related equipment, (No title), Kitchen equipment, Domestic, commercial and industrial heating appliances, Construction materials, Linear and angular measurements, Electrical wires and cables, Technical drawings, Graphical symbols, Electrical accessories, Sports equipment and facilities, Domestic electrical appliances in general, Electronic components in general, Standardization. General rules, Applications of information technology, Information sciences. Publishing, Screw threads, Protection against fire, Terminology (principles and coordination), Protection against crime.

Group Standards of the People's Republic of China, standard revision

• T/CA 003-2018 Intelligent Evaluation for Intellectual Management
• T/HBPX 001-2023 "Chef Chu" training and assessment standards (revised version)
• T/HBPX 002-2023 "Chef Chu" training and assessment standards (revised version)
• T/QDAS 001-2016 Group standard formulation and revision procedures
• T/ZJYLGYXH 001-2020 Zhejiang Beverage Industry Association Group Standard Management Measures (Revised Edition)
• T/NNAS 001-2022 Group standard formulation (revision) procedure specification

German Institute for Standardization, standard revision

• DIN EN 60038:2012 CENELEC standard voltages (IEC 60038:2009, modified); German version EN 60038:2011
• DIN CEN/TR 16443:2013 Backgrounds to the revision of EN 450-1:2005+A1:2007 - Fly ash for concrete; English version CEN/TR 16443:2013

Underwriters Laboratories (UL), standard revision

• UL 879A BULLETINS-2005 Standard for Electric Sign Components (revisions to STP 879) / Note: revision of ANSI/UL 879-2005 *
• UL 879B BULLETINS-2005 Standard for Electric Sign Components (revisions to STP 879) / Note: revision of ANSI/UL 879-2005 *
• UL 858 BULLETINS-2002 Household Electric Ranges / Note: Revision 2001, revision of ANSI/UL 858-2001 * Approved 2001-09-12, 2001-07-10.
• UL 858A BULLETINS-2002 Household Electric Ranges / Note: Revision 2001, revision of ANSI/UL 858-2001 * Approved 2001-09-12, 2001-07-10.
• UL 879A BULLETINS-2002 Standard for Electric Sign Components (revisions to STP 879)
• UL 907 BULLETINS-2005 Standard for Safety for Fireplace Accessories / Note: revision of ANSI/UL 907-2005 * Approved
• UL 1598 BULLETIN-2008 UL Standard for Safety Luminaires Second Edition; Reprint with Revisions Through
• UL 745-2-30-1995 UL Standard for Safety Particular Requirements for Staplers (First Edition; Reprint with Revisions through and Including January 13@ 2009)
• UL 884 BULLETINS-2006 Standard for Safety for Underfloor Raceways and Fittings / Note: revision of ANSI/UL 884-2005 *
• UL 884 BULLETINS-2003 Standard for Safety for Underfloor Raceways and Fittings / Note: revision of ANSI/UL 884-2005 *
• UL 964 BULLETINS-2002 Electrically Heated Bedding / Note: revision of ANSI/UL 964-1987 * Approved 1997-11-24.
• UL 507-2017 UL Standard for Safety Electric Fans (Tenth Edition; Reprint with revisions through and including November 6@ 2018)
• UL 1340-2012 UL Standard for Safety Hoists (Second Edition; Reprint with revisions through and including May 31@ 2013)
• UL 120202-2014 UL Standard for Safety Recommendations for the Preparation@ Content@ and Organization of Intrinsic Safety Control Drawings (First Edition; Reprint with revisions through and including June 30@ 2017)
• UL 507-1999 UL Standard for Safety Electric Fans (Ninth Edition; Reprint with revisions through and including June 18@ 2012)
• UL 696-2010 UL Standard for Safety Electric Toys (Tenth Edition; Reprint with revisions through and including October 30@ 2013)
• UL 120404-2012 UL Standard for Safety Pressurized Enclosures (First Edition; Reprint with revisions through and including November 13@ 2015)
• UL 887 BULLETINS-2005 Delayed-Action Timelocks / Note: revision of ANSI/UL 887-1994 * Approved 2004-01-28.

Aerospace Industries Association/ANSI Aerospace Standards, standard revision

• AIA/NAS NAS850-2012 GENERAL PACKAGING STANDARD (Rev 7)
• AIA/NAS NAS855-2012 INDUSTRIAL PACKAGING STANDARD Rev 2
• AIA/NAS NASM24677-2010 SCREW, CAP, SOCKET HEAD, HEXAGON, DRILLED, ALLOY STEEL (UNC-3A) Rev 1 [Superseded: DLA MS24677 REV D CANC NOTICE 1, DLA MS24677 REV D (1), DLA MS24677 REV D, DLA MS24677 REV C, DLA MS24677 REV B, DLA MS24677 REV A, DLA MS24677]
• AIA/NAS NAS851-2013 GENERAL PACKAGING STANDARD INDEXES (Rev 7)
• AIA/NAS NASM24678-2010 SCREW, CAP, SOCKET HEAD, HEXAGON, DRILLED, ALLOY STEEL (UNF-3A) Rev 1 [Superseded: DLA MS24678 REV E CANC NOTICE 1, DLA MS24678 REV E, DLA MS24678 REV D, DLA MS24678 REV C, DLA MS24678 REV B, DLA MS24678 REV A, DLA MS24678]
• AIA/NAS NASM24674-2010 SCREW, CAP, SOCKET HEAD, HEXAGON, DRILLED, CORROSION-RESISTING STEEL (UNC-3A) Rev 1 [Superseded: DLA MS24674 REV D CANC NOTICE 1, DLA MS24674 REV D (1), DLA MS24674 REV D, DLA MS24674 REV C, DLA MS24674 REV B, DLA MS24674 REV A, DLA MS24674]
• AIA/NAS NAS1524-2012 STANDARDIZATION SAVINGS, IDENTIFICATION & CALCULATION (Rev 4)
• AIA/NAS NAS1433-2011 RADIOGRAPHIC STANDARDS FOR ALUMINUM ALLOY CASTINGS (Rev 2)
• AIA/NAS NAS1434-2013 RADIOGRAPHIC STANDARDS FOR MAGNESIUM ALLOY CASTINGS (Rev 2)
• AIA/NAS NAS1411-2012 Band, Marker, Blank (Rev 3)
• AIA/NAS NAS1000-2012 TUBE END, STANDARD DIMENSIONS FOR INSIDE DOUBLE FLARE (Rev 2)
• AIA/NAS NAS1636-2014 WASHER, KEY, DUAL TAB (Rev 3)
• AIA/NAS NAS941-2015 IDENTIFICATION MARKING OF TITANIUM SHEET (Rev 3)
• AIA/NAS NAS1514-2015 RADIOGRAPHIC STANDARD FOR CLASSIFICATION OF FUSION WELD DISCONTINUITIES (Rev 3)
• AIA/NAS NASM27984-2011 FASTENERS, SNAP, STYLE 5 (SCALLOPED BUTTON HEAD TYPE) Rev 1 [Superseded: DLA MS27984 REV B CANC NOTICE 3, DLA MS27984 REV B VALID NOTICE 2, DLA MS27984 REV B VALID NOTICE 1, DLA MS27984 REV B]
• AIA/NAS NAS854-2013 HAZARDOUS MATERIAL PACKAGING STANDARD PACKAGING AND SAFETY DATA SHEET NAS854 PREPARATION (Rev 2)
• AIA/NAS NASM970-2014 WASHER, FLAT (Rev 2)
• AIA/NAS NAS724-2011 SCREW, MINIATURE, BINDING HEAD (Rev 3)

Aerospace Industries Association, standard revision

• AIA NAS 850-1983 General Packaging Standard (Rev. 6)
• AIA NAS 855-1987 Industrial Packaging Standard Rev. 1
• AIA NAS 823-1991 Cast Surface Comparison Standard (Rev. 2)
• AIA NAS 851-1983 General Packaging Standard Indexes (Rev. 6)
• AIA NAS 10-1945 (Inactive)Standard Form for National Aircraft Standard Drawings (Rev. 1)
• AIA NAS 1524-1971 Standardization Savings, Identification and Calculation (Rev. 3)
• AIA NAS 129-1978 Data - Std. Knob, Engineering Reference (Rev. 3) R(1990)
• AIA NAS 983-1982 Standard Format for NAS 900 Series Equipment Specifications (Rev. 3)
• AIA NAS 1434-1964 Radiographic Standards for Magnesium Alloy Castings (Rev. 1) R(1991)
• AIA NAS 1433-1964 Radiographic Standards for Aluminum Alloy Castings (Rev. 1) R(1991)
• AIA NAS 1411-1969 Band, Marker, Blank (Rev. 2) R(1979)
• AIA NAS 941-1959 Identification Marking of Titanium Sheet (Rev. 1)
• AIA NAS 1000-1962 Tube End-Standard Dimensions for Inside Double Flaire (Rev. 1) R(1994)
• AIA NAS 3105-1991 Bolt-U (Rev. 2)
• AIA NAS 3108-1991 Bolt-U (Rev. 2)
• AIA NAS 3103-1991 Bolt-U (Rev. 2)
• AIA NAS 3106-1991 Bolt-U (Rev. 2)
• AIA NAS 3104-1991 Bolt-U (Rev. 2)
• AIA NAS 3110-1991 Bolt-U (Rev. 2)
• AIA NAS 1001-1978 (Inactive)Tube End-Standard Dimensions for Outside Double Flare (Use MS33583) (Rev. 1)
• AIA NAS 4006-1984 Aluminum Coating (Rev. 3)

AIA/NAS - Aerospace Industries Association of America Inc., standard revision

• NAS716-1963 Standard Power Supply Voltages (Rev 1)
• NAS850-1983 General Packaging Standard (Rev 6)
• NAS850-2012 GENERAL PACKAGING STANDARD (Rev 7)
• NAS855-2012 INDUSTRIAL PACKAGING STANDARD (Rev 2)
• NAS823-2011 CAST SURFACE COMPARISON STANDARD (Rev 3)
• NAS851-1983 General Packaging Standard Indexes (Rev 6)
• NAS851-2013 GENERAL PACKAGING STANDARD INDEXES (Rev 7)
• NAS823-1991 Cast Surface Comparison Standard (Rev 2)
• NAS10-1945 Standard Form for National Aircraft Standard Drawings (Rev 1)
• NAS129-1978 Data - Std. Knob@ Engineering Reference (Rev 3)
• NAS1524-1971 Standardization Savings@ Identification and Calculation (Rev 3)
• NAS1524-2012 STANDARDIZATION SAVINGS@ IDENTIFICATION & CALCULATION (Rev 4)
• NAS1433-2011 RADIOGRAPHIC STANDARDS FOR ALUMINUM ALLOY CASTINGS (Rev 2)
• NAS1433-2018 RADIOGRAPHIC STANDARDS FOR ALUMINUM ALLOY CASTINGS (Rev 3)
• NAS1434-2013 RADIOGRAPHIC STANDARDS FOR MAGNESIUM ALLOY CASTINGS (Rev 2)
• NAS1433-1964 Radiographic Standards for Aluminum Alloy Castings (Rev 1)
• NAS1434-1964 Radiographic Standards for Magnesium Alloy Castings (Rev 1)
• NAS46-1944 Code - Wire Identification (Rev 1)
• NAS983-1982 Standard Format for NAS 900 Series Equipment Specifications (Rev 3)
• NAS983-2013 STANDARD FORMAT FOR NAS 900 SERIES EQUIPMENT SPECIFICATIONS (Rev 4)
• NAS1001-1978 Tube End-Standard Dimensions for Outside Double Flare (Rev 1)
• NAS1000-1962 Tube End-Standard Dimensions for Inside Double Flaire (Rev 1)
• NAS1000-2012 TUBE END@ STANDARD DIMENSIONS FOR INSIDE DOUBLE FLARE (Rev 2)
• NAS1077-2012 FITTING END@ HOSE@ STANDARD DIMENSIONS FOR FLARELESS TUBE (Rev 1)
• NAS941-2015 IDENTIFICATION MARKING OF TITANIUM SHEET (Rev 3)
• NAS941-1959 Identification Marking of Titanium Sheet (Rev 1)
• NAS941-2013 IDENTIFICATION MARKING OF TITANIUM SHEET (Rev 2)
• NAS1077-2017 FITTING END@ HOSE@ STANDARD DIMENSIONS FOR FLARELESS TUBE (Rev 2)
• NASM315-2011 NUT@ PLAIN@ HEXAGON@ AIRFRAME (Rev 2 ***Rev 1 Never Officially Published***)
• NAS1514-2015 RADIOGRAPHIC STANDARD FOR CLASSIFICATION OF FUSION WELD DISCONTINUITIES (Rev 3)
• NAS942-1964 Strain - Gages@ Bonded Resistance (Rev 2 ***BEST AVAILABLE COPY***)
• NAS1514-2011 RADIOGRAPHIC STANDARD FOR CLASSIFICATION OF FUSION WELD DISCONTINUITIES (Rev 2)
• NAS1514-1972 Radiographic Standard for Classification of Fusion Weld Discontinuities (Rev 1)
• NAS1149-1994 Washer@ Flat (Rev 2)
• NAS1082-2012 INSIGNIA@ NATIONAL (Rev 2)
• NASM970-2010 Washer@ Flat (Rev 1)
• NAS1149-2007 Washer@ Flat (Rev 3)
• NAS3441-1983 Bag@ Cushioned (Rev 2)
• NAS493-1951 Stud (Rev 1)
• NAS190-1966 Dimensioning - Decimal Usage for (Rev 2)
• NAS807-1951 Specification - Twin Seaplane Floats (Rev 1)
• NAS1350-1978 Equipment Identification Nameplate & Marking (Rev 1)
• NAS79-1945 Standard Indentors and Nests for Applying Mechanical Terminals (Rev 1)
• NAS1082-1959 Insignia@ National (Rev 1)
• NAS1149-2008 WASHER@ FLAT (Rev 4)
• NAS3413-2012 TUBE@ MAILING (Rev 3)
• NAS1149-2012 WASHER@ FLAT (Rev 5)
• NAS1149-2019 WASHER@ FLAT (Rev 7)
• NAS1653-1979 Connector@ Plug@ Electrical@ Bayonet Coupling Superseded - August 1979 (Rev. 3) (Rev 3)
• NAS854-2013 HAZARDOUS MATERIAL PACKAGING STANDARD PACKAGING AND SAFETY DATA SHEET NAS854 PREPARATION (Rev 2)
• NASM42-49-2010 Bolt@ Eye (Rev 1)
• NAS1898-1989 Seal (Rev 1)
• NAS1281-2012 HOOK@ SNAP (Rev 8)
• NASM970-2014 WASHER@ FLAT (Rev 2)
• NAS724-2015 SCREW@ MINIATURE@ BINDING HEAD (Rev 4)
• NAS724-2011 SCREW@ MINIATURE@ BINDING HEAD (Rev 3)
• NAS555-2011 TEE@ UNIVERSAL (Rev 4)
• NASM39087-2011 HANDLE@ BOW (Rev 1)
• NAS1924-2014 CLAMP@ HOSE (Rev 4)
• NAS1089-1977 Streamer@ Warning (Rev 3)
• NAS4006-2014 ALUMINUM COATING (Rev 5)
• NAS4006-2021 ALUMINUM COATING (Rev 4)
• NASM961-2013 WASHER@ FLAT@ ELECTRICAL (Rev 2)
• NAS1463-1993 Clip@ Spring Tension (Rev 1)
• NAS3415-1983 Bag@ with Stiffener (Rev 2)
• NAS1169-2015 WASHER@ DIMPLED@ 100° (Rev 7)
• NAS3407-2012 BAG@ WATER VAPORPROOF (Rev 3)
• NAS1464-1991 Clip@ Spring Tension (Rev 5)
• NAS3103-3110-2011 BOLT@ U (Rev 3)
• NASM386-2012 PIN@ THREADED@ TAPER (Rev 1)
• NAS1925-2017 CLAMP@ HOSE (Rev 3)
• NASM39087-2014 HANDLE@ BOW (Rev 2)
• NAS1756-1996 Streamer@ Warning (Rev 2)
• NAS3412-2012 Spool@ Packaging of (Rev 2)
• NASM316-2014 NUT@ JAM@ HEXAGON (Rev 2)
• NAS1463-2000 Clip@ Spring Tension (Rev 2)
• NASM302-2011 PIN@ ESCUTCHEON (Rev 1)
• NASM45595/8-2013 WASHER@ SHOULDERED@ PHENOLIC (Rev 1)
• NAS1924-2010 CLAMP@ HOSE (Rev 3)
• NAS1925-2012 CLAMP@ HOSE (Rev 2)
• NAS1411-1969 Band@ Marker@ Blank (Rev 2)
• NAS3103-3110-2015 BOLT@ U (Rev 4)
• NAS43-1962 Spacers - Screw and Bolt (Rev 4; Best Copy Available)
• NAS43-1985 Spacers - Screw and Bolt (Rev 7; Best Copy Available)
• NA0043-1979 Identification of Male Threaded Fasteners Metric (Rev 1)

National Electrical Manufacturers Association（NEMA), standard revision

• NEMA NS 1-2001 Guide for Preparation of NEMA Standards Publications Revision 1: 2003
• NEMA UD 2-2004 ACOUSTIC OUTPUT MEASUREMENT STANDARD FOR DIAGNOSTIC ULTRASOUND EQUIPMENT (Revision 3)
• NEMA WC 57-1995 Standard for Control Cables ICEA S-73-532; Revision 2 - September 1998 Incorporated

NEMA - National Electrical Manufacturers Association, standard revision

• NEMA ICS 1-1983 GENERAL STANDARDS FOR INDUSTRIAL CONTROL AND SYSTEMS; REVISION 1 - SEPTEMBER 1984@ REVISION 2 - JUNE 1985@ REVISION 3 - NOVEMBER 1985@ REVISION 4 - OCTOBER 1987
• NEMA MW 1000-1997 Magnet Wire (Revision 1:1998; Revision 2:1998; Revision 3:12/1999; Revision 4:03/2001)
• NEMA ICS 2-1983 Standard for Industrial Control Devices@ Controllers and Assemblies (Includes Revision 1: January 1984@ Revision 2: June 1985@ Revision 3: May 1986@ and Revision 4: January 1987)
• NEMA ICS 1-1988 GENERAL STANDARDS FOR INDUSTRIAL CONTROL AND SYSTEMS; REVISION 1 - MAY 1989@ REVISION 2 - JANUARY 1990
• NEMA MG 1-1978 MOTORS AND GENERATORS (R 1981); REV. 1 - NOVEMBER 1978@ REV. 2 - MAY 1979@ REV. 3 - FEBRUARY 1980@ REV. 4 - JUNE 1980@ REV. 5 - DECEMBER 1980@ REV. 6 - JUNE 1981@ REV. 7 - JULY 1982@ REV. 8 - NOVEMBER 1984
• NEMA WC 8-1976 ETHYLENE-PROPYLENE- RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY (R 1988) (ICEA S-68- 516); REV. 1-77@ REV. 2- 78@ REV.3-78@ REV. 4-79@ REV. 5-80@ REV. 6-83@ REV. 7-84@ REV. 8-85@ REV. 9-86@ REV. 10-87
• NEMA MW 1000-1987 MAGNET WIRE; REVISION 1 - OCTOBER 1987@ REVISION 2 - MARCH 1989@ REVISION 3 - MARCH 1990
• NEMA MW 1000-1981 MAGNET WIRE; REVISION 1 - JULY 1982@ REVISION 2 - FEBRUARY 1984@ REVISION 3 - OCTOBER 1984
• NEMA CG 1-1982 MANUFACTURED GRAPHITE ELECTRODES (R 1987); REVISION 1 - FEBRUARY 1984@ REVISION 2 - OCTOBER 1985@ REVISION 3 - JULY 1987@ REVISION 4 - SEPTEMBER 1988
• NEMA ICS 6-1983 ENCLOSURES FOR INDUSTRIAL CONTROLS AND SYSTEMS; REVISION 1 - SEPTEMBER 1984@ REVISION 2 - JUNE 1985@ REVISION 3 - FEBRUARY 1986@ REVISION 3 - NOVEMBER 1986
• NEMA WC 3-1980 RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY (INCLUDES Revision 1: January 1983@ Revision 2: September 1984@ Revision 3: August 1986@ Revision 4: July@ Revision 5: May 1988@ and Revision 6: May 1989)
• NEMA AB 1-1975 Molded Case Circuit Breakers (Includes Revision 1: 09/01/1976@ Revision 2: 01/10/1977@ and Revision 3: 01/31/1978)
• NEMA WC 3-1969 RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY (INCLUDES Revision 1: March 1971@ Revision 2: February 1972@ Revision 3: September 1973@ Revision 4: October 1974@ Revision 5: June 1978@ Revision 6: September 1977
• NEMA ICS 3-1983 INDUSTRIAL SYSTEMS; REVISION 1 - MARCH 1985@ REVISION 2 - JULY 1987@ REVISION 3 - OCTOBER 1987 (R 1988)
• NEMA TS 1-1983 TRAFFIC CONTROL SYSTEMS; REVISION 1 - JULY 1984@ REVISION 2 - OCTOBER 1985@ REVISION 3 - AUGUST 1986
• NEMA CB-1:1970 Brushes for Electrical Machines (Revisions 1-2:1974 ***BEST AVAILABLE COPY***)

Institute of Interconnecting and Packaging Electronic Circuits (IPC), standard revision

• IPC TM-650 1.2-2003 Calibration Revision A
• IPC TM-650 2.5.7-2004 Dielectric Withstanding Voltage, PCB Revision D
• IPC TM-650 5.5-1998 Artwork Revision B
• IPC TM-650 1.1-2003 Introduction Revision C

SAE - SAE International, standard revision

• SAE USCAR12-2017 ELECTRICAL CONNECTOR DESIGN CRITERIA (Revision 4)
• SAE USCAR12-2016 ELECTRICAL CONNECTOR DESIGN CRITERIA (Revision 4)
• SAE USCAR3-2002 Standard for Testing Automotive Miniature Bulbs (Revision 2)
• SAE USCAR4-2016 Standard for Cigar Lighters & Power Outlets (Revision 1)
• SAE AS9000-1998 Aerospace Basic Quality System Standard (Editorial Revision Only)
• SAE USCAR2-2004 PERFORMANCE STANDARD FOR AUTOMOTIVE ELECTRICAL CONNECTOR SYSTEMS (Revision 4)
• SAE USCAR2-2001 PERFORMANCE STANDARD FOR AUTOMOTIVE ELECTRICAL CONNECTOR SYSTEMS (Revision 3)

AASHTO - American Association of State Highway and Transportation Officials, standard revision

• AASHTO DS:1991 Policy on Design Standards - Interstate System (Revision 4)
• AASHTO DS:2005 A POLICY ON DESIGN STANDARDS INTERSTATE SYSTEM (Revision 5)
• AASHTO DS:2016 A Policy on Design Standards-Interstate System (Revision 6)
• LTS AMD 2-2011 2011 Interim Revisions to Standard Specifications for Structural Supports for Highway Signs@ Luminaires@ and Traffic Signals (Fifth Edition; Interim Revision)
• LTS AMD 1-2010 2010 Interim Revisions to Standard Specifications for Structural Supports for Highway Signs@ Luminaires@ and Traffic Signals (Fifth Edition; Interim Revision)
• PP 70-2010 Standard Practice for Collecting the Transverse Pavement Profile (Revision 1)
• LRFDLTS-2015 Interim Revisions to the LRFD Specifications for Structural Supports for Highway Signs@ Luminaires@ and Traffic Signals (First Edition; 2017 Interim Revision@ 2018 Interim Revision)
• M120-1999 Standard Specification for Zinc (Nineteeth Edition; Revised Per Interim Specifications - Specifications - 1999)
• T 30-2010 Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Revision 1)
• CHBTW AMD 1-2008 Construction Handbook for Bridge Temporary Works (Revision 1; 2008 Interim Revision)

The American Road & Transportation Builders Association, standard revision

• AASHTO DS-2016 A Policy on Design Standards-Interstate System (Revision 6)
• AASHTO PP 70-2010 Standard Practice for Collecting the Transverse Pavement Profile Revision 1
• AASHTO LTS AMD 1-2010 2010 Interim Revisions to Standard Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals Fifth Edition; Interim Revision
• AASHTO T 30-2010 Standard Method of Test for Mechanical Analysis of Extracted Aggregate Revision 1

American National Standards Institute （ANSI), standard revision

• ANSI Z97.1 ERTA-2010 Re: ANSI Z97.1 - 2009 Errata
• ANSI/DMIS 105.2Part 1-2009 Dimensional Measuring Interface Standard, Rev. 5.2, Part 1

Institute of Electrical and Electronics Engineers (IEEE), standard revision

• IEEE Unapproved Draft Std P686/D2, Jan 2008 IEEE Draft Standard Radar Definitions (Revision of IEEE 686-1997)
• IEEE 835a-2012 IEEE Standard Power Cable Ampacity Tables - Amendment 1: Revision to Introduction
• IEEE Active Unapproved Draft Std PC37.59/D11, Jul IEEE Draft Standard Requirements for Conversion of Power Switchgear Equipment (Revision of IEEE Std C37.59-2002)
• IEEE Unapproved Draft Std P1028_Draft7.0, Feb 2008 IEEE Draft Standard for Software Reviews and Audits (Revison of IEEE 1028-1997)
• IEEE Std P828/D2 Approved IEEE Draft Standard for Software Configuration Management Plans (Revision of 828-1998)
• IEEE Unapproved Draft Std P1647/D9, Jan 2007 IEEE Draft Standard for the Functional Verification Language 'E' (Revision of IEEE 1647-2006)
• IEEE Approved Draft Std P1076.1/D3.3, Feb 6, 2007 Approved IEEE Draft Standard VHDL Analog and Mixed-Signal Extensions (Revision of IEEE Std 1076.1-1999)
• IEEE Std P802.1v/D6 IEEE Standards Amendment to IEEE 802.1Q: IEEE Standards for Local and Metropolitan Area Networks: Virtual Bridged Local Area Networks--Amendment 2: VLAN Classification by Protocol and Port (Amendment to IEEE Std 802.1Q, 1998 Edition) (Incorporated Into 80
• IEEE Unapproved Draft Std P1076/D4.2, Apr 2008 IEEE Draft Standard VHDL Language Reference Manual (Revision of IEEE Std 1076-2002)
• IEEE Active Unapproved Draft Std P829/D8, July 200 IEEE Draft Standard for Software and System Test Documentation (Revison of IEEE 829-1998)
• IEEE Active Unapproved Draft Std P829/D8, July 2007 IEEE Draft Standard for Software and System Test Documentation (Revison of IEEE 829-1998)
• IEEE Unapproved Draft Std P829/D11, Feb 2008 Draft IEEE Standard for Software and System Test Documentation (Revision of IEEE 829-1998)

GM Europe, standard revision

• GME QK 000150-2011 Polyamide 11 Standard (revision 3; English/German)
• GME QK 001145-2011 Polyamide 66 standard quality (revision 3; English/German)
• GME TM 413100-2013 TPO-Foil (Revision 4; English/German; This standard may be applied only for current programs. It is inactive for all future projects and without replacement)
• GME TM 422100-2013 TPO-Foil (Revision 2: English/German: This standard may be applied only for current programs. It is inactive for all future projects and without replacement)
• GME 01103-2012 Pr黤ung von Kopfst黷zen Test of Head Restraints Revision 4; English/German; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14604

US-FCR, standard revision

• FCR FED 4940.4-1978 MINIMUM DESIGN STANDARDS FOR REHABILITATION FOR RESIDENTIAL PROPERTIES REPRINT INCORPORATES REVISIONS

A4A - Airlines for America, standard revision

• SPEC 103-1996 Standards for Jet Fuel Quality Control at Airports (Revision 5)

SCC, standard revision

• NEMA UD 2-2004(R2009) Acoustic Output Measurement Standard for Diagnostic Ultrasound Equipment, Revision 3
• AWWA ACE94050 Revision of Japanese Drinking Water Quality Standards and Its Enforcement System
• ISO Guide 30:2015/DAmd 1 Reference materials — Selected terms and definitions — Amendment 1: Revisions of definitions for reference material and certified reference material

Society of Automotive Engineers (SAE), standard revision

• SAE USCAR2-2020 PERFORMANCE STANDARD FOR AUTOMOTIVE ELECTRICAL CONNECTOR SYSTEMS (Revision 4)
• SAE AS27465AR-5-2017 AS27465AR Amendment Record for Drawing Standard AS27465-499

Professional Standard - Agriculture, standard revision

• 藥典46-2013 Revised Standards for Xiaoai Plain Tablets
• 藥典47-2013 Revised Standard for Xiaoaiping Syrup
• 藥典62-2014 Xianlexiong Capsule Revised Standard
• 藥典61-2014 Revised standards for new biochemical granules
• 藥典64-2014 Revised standards for Xiaoer Qingyan Granules
• 4藥典 三部-2015 List of new and revised general rules in this edition of Pharmacopoeia (Three Volumes)
• 藥典48-2013 Revised standard of new compound daqing leaves
• GB 7718-2011問答2 Questions and Answers on "General Rules for the Labeling of Prepackaged Foods" (Revised Edition)

Professional Standard - Post and Telecommunication, standard revision

• YDN 089-1998 No.7 Signaling Network Technical System (Revision 1998) (Internal Standard)

American Society of Mechanical Engineers (ASME), standard revision

• ASME Y14.24-1999 Types and Applications of Engineering Drawings Revision of ASME Y14.24M-1989
• ASME B1.22M-1985 Gages and Gaging for MJ Series Metric Screw Threads Revision of ANSI B1.22-1978

(U.S.) Telecommunications Industries Association?, standard revision

• TIA-568-C.3-2008 Optical Fiber Cabling Components Standard (Incorporates Editorial Corrections: 10/31/2008)
• TIA/EIA/IS-840-A-2001 Minimum Performance Standards for Text Telephone Signal Detector and Text Telephone Signal Regenerator
• TIA-2000.6-D-1[E]-2006 Analog Signaling Standard for cdma2000 Spread Spectrum Systems ?Addendum 1 Addendum to TIA-2000.6-D

International Telecommunication Union (ITU), standard revision

• ITU-R P.835-4-2005 Reference standard atmospheres

ECIA - Electronic Components Industry Association, standard revision

• IS-5-A-1985 Packaging Material Standards for ESD Sensitive Items ((Revision of IS-5))

(U.S.) Ford Automotive Standards, standard revision

• FORD APPENDIX Z-2011 Record of Revisions to the Ford Engineering CAD & Drafting Standards (Version 28)
• FORD GMS-003-2001 Global Manufacturing Standards Revision Notice

Hebei Provincial Standard of the People's Republic of China, standard revision

• DB/1300 A00 4-1987 General rules for standard formulation and revision

CZ-CSN, standard revision

• CSN 34 5165 Revised Czech national standard 345165
• CSN 66 6505 Za-1985 Revision a. 10/1985 Czech National Standard 66 6505 Basic Terms for Films
• CSN 01 3410 Za-1987 Revision a-1/1987 Czech National Standard 01 3410 Basic Clauses for Large Mapping Benchmarks
• CSN 35 9011 Za-1983 Revised a-12/1983 Czech National Standard 35 9011 Circuit Board. basic network
• CSN 49 0600 Za-1984 Revision a-10/1984 Czech National Standard 49 0600 Wood Maintenance. Basic rules
• CSN 66 6451 Za-1985 Revision a. 8/1985 Czech National Standard 66 6451 Basic specifications of film 120

International Federation of Trucks and Engines, standard revision

• NAVISTAR TMS 4508-2000 Metric Blue Identification (Revision B-1)
• NAVISTAR TMS 9522-2008 Glazing (Revision J)

Jiangsu Provincial Standard of the People's Republic of China, standard revision

• DB32/T 4358-2022 Drawing Standards for Architectural Decoration (Revised)

US-ACEI, standard revision

• IPC 1710-1997 OEM Standard for Printed Board Manufacturers' Qualification Profile Revision A

AGMA - American Gear Manufacturers Association, standard revision

• 6010-E88-1988 Standard for Spur@ Helical@ Herringbone@ and Bevel Enclosed Drives (Revision of 420.04)

National Aeronautics and Space Administration (NASA), standard revision

• NASA NPD 7120.4 REV D-2010 PROGRAM/PROJECT MANAGEMENT [Cancelled: NASA NASA NPD 2820.1 REV C, NASA NASA NPD 2820.1 REV B, NASA NASA NPD 2820.1 REV A, NASA NASA NPD 2820.1, NASA NASA NPD 8010.2 REV E, NASA NASA NPD 8010.2 REV D, NASA NASA NPD 8010.2 REV C, NASA NASA NPD 8070.6 R

AT-ON, standard revision

• ONORM S 4611/A1-2000 Ski runs-Classification and basic signs(Amendment)

Professional Standard - Traffic, standard revision

• JT/T 18-1998 Requirement and procedure for working out or revising standard of transportation trade

US-GSFC, standard revision

• GSFC NASA GPR 1710.1 REV H-2008 Corrective and Preventive Action [Cancelled: GSFC NASA GPG 1710.1 REV G, GSFC NASA GPG 1710.1 REV F, GSFC NASA GPG 1710.1 REV E]
• GSFC NASA GPR 5340.2 REV I-2008 Control of Nonconformances [Cancelled: GSFC NASA GPG 5340.2 REV H, GSFC NASA GPG 5340.2 REV G, GSFC NASA GPG 5340.2 REV F]

DIN, standard revision

• DIN EN 60598-2-20:2004 Luminaires - Part 2-20: Particular requirements - Lighting chains (IEC 60598-2-20:1996, modified + A1:1998, modified + A2:2002, modified); German version EN 60598-2-20:1997 + A1:1998 + Corrigendum December 1998 + A2:2004

Canadian Standards Association (CSA), standard revision

• CSA C657-04-2004 Energy Performance Standard for Refrigerated Display Cabinets (Merchandisers) Second Edition; Update No 1
• CSA C239-02-2002 Performance Standard for Dusk-to-Dawn Luminaires Fourth Edition; Update No 1

CN-STDBOOK, standard revision

• 圖書 3-9674 Introduction to "Excellent Performance Evaluation Criteria" (Revised Edition)

American Society for Testing and Materials (ASTM), standard revision

• ASTM E2017-99 Standard Guide for Amendments to Health Information
• ASTM E2017-99(2010) Standard Guide for Amendments to Health Information
• ASTM E2017-99(2005) Standard Guide for Amendments to Health Information

Henan Provincial Standard of the People's Republic of China, standard revision

• DB4117/T 350-2022 Local standard formulation and revision work specifications

Heilongjiang Provincial Standard of the People's Republic of China, standard revision

• DB23/T 3333-2022 Guidelines for formulation and revision of local standards

Anhui Provincial Standard of the People's Republic of China, standard revision

• DB34/T 2800-2020 Guidelines for formulation and revision of local standards
• DB34/T 2800-2016 Guidelines for formulation and revision of local standards

Hainan Provincial Standard of the People's Republic of China, standard revision

• DB46/T 74-2021 Local standard formulation and revision work specifications
• DB46/T 74-2018 Work procedures for formulation and revision of local standards

Professional Standard - Public Safety Standards, standard revision

• GA/T 720-2014 Work procedures for the formulation and revision of fire protection standards
• GA/Z 1405-2017 Guidelines for the formulation and revision of public security standards
• GA/T 720-2007 procedures for fire protection standardization
• GA/T 1045-2017 Guidelines for the formulation and revision of public security standards

Fujian Provincial Standard of the People's Republic of China, standard revision

• DB3505/T 1-2023 Guidelines for the formulation and revision of local standards

IPC - Association Connecting Electronics Industries, standard revision

• IPC TM-650 5.5.1-1998 IPC Artwork (Revision C)

Shaanxi Provincial Standard of the People's Republic of China, standard revision

• DB6108/T 42-2022 Guidelines for formulation and revision of local standards

IX-EU/EC, standard revision

• MEDDEV 2.2/1-1998 EMC REQUIREMENTS (REV 1)

應急管理部, standard revision

• XF/T 720-2014 Work procedures for the formulation and revision of fire protection standards

Others:   Standard revision, Environmental standard version, revision of standards, standard iec version, Multiple standard revisions, Food Standards Revision, Standard revision method, standard revision, Standard revision, Standard version analysis, test standard version, Standard "Revised, Beverage Standard Revision, version standard number, Inspection standard version, local standard revision, Standard revision, Standard Version Report, Standard Amendment, draft standard revision.