ZH
KR
JP
ES
RU
DEglass compressive strength
glass compressive strength, Total:200 items.
In the international standard classification, glass compressive strength involves: Reinforced plastics, Pipeline components and pipelines, Materials for the reinforcement of composites, Analytical chemistry, Fasteners, Insulating materials, Construction materials, Glass, Bottles. Pots. Jars, Aircraft and space vehicles in general, Waxes, bituminous materials and other petroleum products, Protection against crime, Materials for aerospace construction, Ceramics, Shipbuilding and marine structures in general, Lamps and related equipment, Wood, sawlogs and sawn timber, Construction industry, Rubber and plastics products.
PL-PKN, glass compressive strength
International Organization for Standardization (ISO), glass compressive strength
- ISO 3605:1987 Textile glass; Rovings; Determination of compressive strength of rod composites
- ISO 3597-3:1993 Textile-glass-reinforced plastics; determination of mechanical properties on rods made of roving-reinforced resin; part 3: determination of compressive strength
- ISO 3597-3:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3: Determination of compressive strength
- ISO 1288-4:2016 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
- ISO 1288-1:2016 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
- ISO 3605:1978 Textile glass reinforced plastics — Composites in the form of rods made from textile glass rovings — Determination of compressive strength
- ISO 3616:1977 Textile glass; Mats; Determination of average thickness, thickness under load and recovery after compression
- ISO 22509:2020 Glass in building — Heat strengthened soda lime silicate glass
BE-NBN, glass compressive strength
- NBN T 41-007-1975 Textile glass reinforced plastics — Determination of the compressive properties
Spanish Association for Standardization (UNE), glass compressive strength
- UNE 43-506-1985 Textile glass. Textile glass mats, determination of average thickness, negative pressure thickness and recovery thickness after compression
- UNE 43506:1985 TEXTILE GLASS. MATS OF TEXTILE GLASS. DETERMINATION OF AVERAGE THICKNESS, THICKNESS UNDER LOAD AND RECOVERY AFTER COMPRESSION
- UNE 43 023 Glass. Safety glass, effect of humidity on pressed glass
- UNE-EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
- UNE-EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass.
- UNE-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.
- UNE-EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, glass compressive strength
- GB/T 1448-1983 Test method for compressive properties of glass fiber-reinforced plastics
- GB/T 14209-1993 Textile glass--Rovings--Determination of compressive strength of rod composites
- GB/Z 21213-2007 High strength laminated sheet based on halongen-free flame-resistant resins and glass cloth
- GB/T 15231.2-1994 Test methods for the properties of glass fibre reinforced cement. The compressive strength
- GB/T 1450.2-1983 Test method for the punch-type of strength of glass fiber-reinforced plastics
- GB/T 14208.3-2009 Textile-glass-reinforced plastics.Determination of mechanical properties on rods made of roving-reinforced resin.Part 3:Determination of compressive strength
- GB/T 43874-2024 Test methods for compressive properties of glass materials and products
- GB/T 1450.1-1983 Test method for interlaminar shear strength of glass fiber-reinforced plastics
Korean Agency for Technology and Standards (KATS), glass compressive strength
- KS M 3383-2004 Testing methods for compressive properties of glass fiber reinforced plastics
- KS M 3383-2009 Testing methods for compressive properties of glass fiber reinforced plastics
- KS M ISO 3597-3:2012 Textile-glass-reinforced plastics-Determination of mechanical properties on rods made of roving-reinforced resin-Part 3:Determination of compressive strength
- KS L ISO 9385-2020 Testing method for knoop indentation hardness of glass and glass-ceramics
- KS L 2102-2005 Testing method for knoop indentation hardness of glass and glass-ceramics
- KS L 2015-2006(2021) Heat-strengthened glass
- KS L 2015-1996 Heat-strengthened glass
- KS L 2015-2021 Heat-strengthened glass
- KS M 3085-1994 Testing method for Charpy impact strength of glass fiber reinforced plastics
- KS M 3385-2020 Testing method for transverse shear strength of glass fiber reinforced plastics
- KS L 2102-2000 Testing method for knoop indentation hardness of glass and glass-ceramics
- KS L ISO 9385-2010(2020) Testing method for knoop indentation hardness of glass and glass-ceramics
- KS L 2102-1980 Testing method for knoop indentation hardness of glass and glass-ceramics
- KS M 3084-2003 TESTING METHOD FOR LZOD IMPACT STRENGTH OF GLASS FIBER REINFORCED PLASTICS
- KS M 3085-2014 Testing method for charpy impact strength of glass fiber reinforced plastics
- KS M 3385-2004(2020) Testing method for transverse shear strength of glass fiber reinforced plastics
Japanese Industrial Standards Committee (JISC), glass compressive strength
Taiwan Provincial Standard of the People's Republic of China, glass compressive strength
- CNS 12781-1990 Method of Test for Compressive Properties of Glass Fiber Reinforced Plastics
- CNS 2217-1985 Tempered Glasses
- CNS 12782-1990 Method of Test for Apparent Interlaminal Shear Strength of Glass Fiber Reinforced Plastics
GM Global, glass compressive strength
- GMW 16900-2013 Polypropylene, Long Glass Fiber Reinforced, Compression Molded Issue 1; English
- GMW 16901-2013 Polypropylene, Glass Fiber Fabric Reinforced, Compression Molded Issue 1; English
- GMW 16902-2013 Polypropylene - 45% Glass/Mineral Reinforced, Sheet, Compression Molded Issue 1; English
IT-UNI, glass compressive strength
- UNI 7531-1976 glass container. Determination of strength against internal pressure
- UNI 5306-1963 Glass products for technology and hygiene. Anti-bulge strength test of wire glass at temperature ≥100℃
- UNI 7403-1975 Technology, pharmaceutical and sanitary glass products. Chemical strength of glassy enamel
- UNI 5302-1963 Glass products for technology and hygiene. Determination of hydrolytic strength of glass powder at 100°C
- UNI 5305-1963 Glass products for technology and hygiene. Anti-bulge strength test of wire glass when the temperature is lower than 100℃
Association Francaise de Normalisation, glass compressive strength
- NF T57-103:1991 TEXTIL-GLASS-REINFORCED PLASTICS. DETERMINATION OF COMPRESSIVE PROPERTIES IN THE DIRECTION PARALLEL TO THE PLANE OF LAMINATION.
- NF EN 572-7:2013 Glass in construction - Basic products: soda-lime silicate glass - Part 7: reinforced or unreinforced profiled glass
- NF P78-341*NF EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1 : fundamentals of testing glass.
- NF P78-344*NF EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4 : testing of channel shaped glass
- NF EN 59:2016 Glass-reinforced plastics - Determination of penetration hardness using a Barcol hardness tester
- NF T57-106*NF EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
- NF T57-160-3*NF ISO 3597-3:2004 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3 : determination of compressive strength
- NF P84-312:1981 Waterproofing . High-strength flexible reinforced bituminous covering with double fibreglass and fibreglass fabric reinforcement.
- NF P78-401:1988 Glass and glazing. Glazing resistance to firearm projectiles. Shooting test on glazing.
- NF P78-211-3:2011 Glass in building - Laminated glass and laminated safety glass - Part 3 : laminated glass.
- NF P78-211-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2 : laminated safety glass.
- NF T57-106:1977 Glass reinforced plastics. Measurement of hardness by means of a barcol impressor .
- NF P78-211-6:2011 Glass in building - Laminated glass and laminated safety glass - Part 6 : appearance.
- NF T57-153:1973 PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. PREPARATION OF GLASS FIBRE REINFORCED,RESIN BONDED,LOW-PRESSURE LAMINATED PLATES OR PANELS FOR TEST PURPOSES.
Danish Standards Foundation, glass compressive strength
- DS/INSTA 154:1987 Security glazings and safety glazings. Classification of resistance
- DS/EN 59:1978 Glass reinforced plastics. Measurement of hardness by means of a Barcol impressor
- DS/EN 1288-4:2001 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
- DS/EN 1288-1:2001 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
- DS/EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
RU-GOST R, glass compressive strength
- GOST R 57963-2017 Hollow glass microspheres. Method for determination of compressive strength
- GOST 34208-2017 Glassfiber. Mats. Determination of average thickness, thickness under load and recovery after compression
- GOST 32281.1-2013 Glass in building. Determination of the bending strength of glass. Part 1. Fundamentals of testing glass
- GOST 32298-2013 Glass and glass products. Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
- GOST 9900-1985 Inorganic glass and glasscrystal materials. Methods for the determination of elastic module at cross static bending
U.S. Military Regulations and Norms, glass compressive strength
SCC, glass compressive strength
- NS-EN 59:2016 Glass reinforced plastics — Determination of indentation hardness by means of a Barcol hardness tester
- AENOR UNE 43023:1953 GLASS. SAFETY GLASS. INFLUENCE OF HUMIDITY ON LAMINAR GLASS
- DANSK DS/EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
- DANSK DS/EN 1288-4:2001 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
- AENOR UNE-EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass.
- NS-EN 1288-4:2000 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass
- NS-EN 59:1977 Glass reinforced plastics — Measurement of hardness by means of a Barcol impressor
- NS-EN 1288-1:2000 Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass
- DIN EN 59 E:2015 Draft Document - Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; German version prEN 59:2015
- AENOR UNE-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.
- DANSK DS/EN 1288-1:2001 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
- 07/30046996 DC BS ISO 1288-4. Glazing in building. Determination of the bending strength of glass. Part 4. Testing of channel shaped glass
- 07/30046980 DC BS ISO 1288-1. Glazing in building. Determination of the bending strength of glass. Part 1. Fundamentals of testing glass
- MIL MIL-PRF-46197A-1997 LAMINATE: HIGH-STRENGTH GLASS, FABRIC-REINFORCED, POLYESTER RESIN PREIMPREGNATED (SUPERSEDING MIL-L-46197)
- AENOR UNE 43021:1953 GLASS. SAFETY GLASS. BREAKAGE DUE TO THE IMPACT OF A BALL ON REINFORCED GLASS
- DANSK DS/EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
- MIL MIL-C-20079H-1987 CLOTH, GLASS; TAPE, TEXTILE GLASS; & THREAD, GLASS & WIRE-REINFORCED GLASS (SUPERSEDING MIL-C-20079G)
- DIN EN ISO 1288-4 E:2007 Draft Document - Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass (ISO/DIS 1288-4:2007); German version prEN ISO 1288-4:2007
- BS 2782-10 METHOD 1008C:1996 Methods of testing plastics. Glass reinforced plastics-Determination of compressive strength on rods made from roving-reinforced resins
- CAN/CGSB-12.11-M90-1990 Reinforced safety glass
- DANSK DS/ISO 22509:2020 Glass in building – Heat strengthened soda lime silicate glass
- DIN EN ISO 1288-1 E:2007 Draft Document - Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass (ISO/DIS 1288-1:2007); German version prEN ISO 1288-1:2007
- AENOR UNE-EN 59:2016 Plastic materials reinforced with fiberglass. Determination of indentation hardness using a Barcol durometer.
British Standards Institution (BSI), glass compressive strength
- BS EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Testing of channel shaped glass
- BS ISO 3597-3:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of compressive strength
- BS EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Fundamentals of testing glass
- BS ISO/TS 12928:1999 Glass in building. Determination of the bending strength of glass. Fundamentals of testing glass
- BS EN 59:2016 Glass reinforced plastics. Determination of indentation hardness by means of a Barcol hardness tester
- 14/30288714 DC BS EN ISO 1288-4. Glass in building. Determination of the bending strength of glass. Part 4. Testing of channel-shaped glass
- BS ISO 22509:2020 Glass in building — Heat strengthened soda lime silicate glass
- 14/30288705 DC BS EN ISO 1288-1. Glass in building. Determination of the bending strength of glass. Part 1. Fundamentals of testing glass
American Society for Testing and Materials (ASTM), glass compressive strength
- ASTM C147-86(2020) Standard Test Methods for Internal Pressure Strength of Glass Containers
- ASTM C147-86(2000) Standard Test Methods for Internal Pressure Strength of Glass Containers
- ASTM C147-86(1995) Standard Test Methods for Internal Pressure Strength of Glass Containers
- ASTM D3517-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- ASTM D3517-11 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- ASTM D3517-14 Standard Specification for ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pressure Pipe
- ASTM D3517-24 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- ASTM C700-07a Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
- ASTM C700-07 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
- ASTM C700-07e1 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
- ASTM D5685-02 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
- ASTM D5685-95 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
- ASTM D5685-05 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
GSO, glass compressive strength
- BH GSO ISO 3597-3:2016 Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 3: Determination of compressive strength
- OS GSO ISO 3597-3:2015 Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 3: Determination of compressive strength
- GSO ISO 3597-3:2015 Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 3: Determination of compressive strength
- BH GSO ISO 1288-1:2022 Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass
- GSO ISO 1288-1:2021 Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass
- GSO ISO 1288-4:2021 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass
- BH GSO ISO 1288-4:2022 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass
- OS GSO ASTM D3517:2016 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- BH GSO ASTM D3517:2017 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- GSO ASTM D3517:2016 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
Military Standard of the People's Republic of China-General Armament Department, glass compressive strength
- GJB 1798-1993 Test method for static pressure damage resistance of aircraft glass
- GJB 1798A-2020 Test method for pressure failure strength of aircraft glass
- GJB 1797-1993 Test method for pressure difference strength of aircraft electrically heated glass under temperature difference
- GJB 84-1986 High-strength fiberglass cloth (S fiberglass cloth)
- GJB 83-1986 High-strength glass fiber yarn (S glass fiber yarn)
- GJB 1039-1990 Injection molding epoxy glass cloth reinforced plastic
Lithuanian Standards Office , glass compressive strength
- LST EN 59-2000 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
- LST EN 1288-4-2002 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
- LST EN 1288-1-2002 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
- LST EN 12603-2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
German Institute for Standardization, glass compressive strength
- DIN EN 59:2016-06 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; German version EN 59:2016
- DIN EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass; German version EN 1288-4:2000
- DIN EN 1288-4:2000-09 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass; German version EN 1288-4:2000 / Note: To be replaced by DIN EN ISO 1288-4 (2007-10).
- DIN EN 1288-1:2000-09 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass; German version EN 1288-1:2000 / Note: To be replaced by DIN EN ISO 1288-1 (2007-10).
- DIN EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass; German version EN 1288-1:2000
- DIN 53390:1988 Testing of glass fibre reinforced plastics; bending test on unidirectional glass fibre reinforced laminated plastics in the form of round bars
- DIN EN 12603:2003-04 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data; German version EN 12603:2002
European Committee for Standardization (CEN), glass compressive strength
- EN 1288-4:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 4: Testing of Channel Shaped Glass
- EN 1288-1:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 1: Fundamentals of Testing Glass
未注明發布機構, glass compressive strength
- JIS R 3111-4:2023 Glass in building -- Determination of the bending strength of glass -- Part 4: Testing of channel shaped glass
- JIS R 3222:2023 Heat strengthened glass
CZ-CSN, glass compressive strength
Professional Standard - Building Materials, glass compressive strength
- JC/T 2285-2014 Test method for isostatic compression strength (microspheres-gas compression) for hollow glass microspheres
- JC/T 676-1997 Test method for flexure of glass material
- JC/T 2096-2011 Fiber glass-reinforced plastics high pressure line pipe
RO-ASRO, glass compressive strength
South African Bureau of Standard, glass compressive strength
- SANS 1538:2001 Plain-woven glass rovings for glass-reinforced plastics laminates
- SANS 1538:2008 Plain-woven glass rovings for glass-reinforced plastics laminates
- SANS 141:2006 Glass-reinforced polyester (GRP) laminates
- SANS 1150:2007 Glass-reinforced polyester (GRP) laminated sheets (profiled or flat)
GM North America, glass compressive strength
Professional Standard - Light Industry, glass compressive strength
CH-SNV, glass compressive strength
國家市場監督管理總局、中國國家標準化管理委員會, glass compressive strength
Institute of Interconnecting and Packaging Electronic Circuits (IPC), glass compressive strength
Professional Standard - Construction Industry, glass compressive strength
United States Navy, glass compressive strength
Standard Association of Australia （SAA）, glass compressive strength
- AS 3572.12:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 12: Determination of initial failure pressure and initial hoop strength of glass filament reinforced plastics pipes
Professional Standard - Aviation, glass compressive strength
Professional Standard-Ships, glass compressive strength
- CB 1200.2-1988 Strength Calculation of FRP Members Sandwich Panels
- CB 1200.1-1988 Strength Calculation of FRP Components for Single-Story Structures
Professional Standard - Electron, glass compressive strength
IPC - Association Connecting Electronics Industries, glass compressive strength
(U.S.) Ford Automotive Standards, glass compressive strength
National Metrological Verification Regulations of the People's Republic of China, glass compressive strength
Professional Standard - Aerospace, glass compressive strength
- QJ 1853-1990 Test method for tensile strength of glass/phenolic, high silica/phenolic molded products
TR-TSE, glass compressive strength
TH-TISI, glass compressive strength
Group Standards of the People's Republic of China, glass compressive strength
- T/CECS 10350-2023 Lightweight high-strength fiberglass cover for deodorization collection
FI-SFS, glass compressive strength
- SFS 3833-1977 Fiberglass products. blanket. Tensile strength determination