ZH
KR
JP
ES
RU
DEMEMS detection | Noise detection
MEMS detection | Noise detection, Total:92 items.
In the international standard classification, MEMS detection | Noise detection involves: Acoustics and acoustic measurements, Testing of metals, Non-destructive testing, Aircraft and space vehicles in general, Electricity. Magnetism. Electrical and magnetic measurements, Textile machinery, Quality, Metrology and measurement in general, Machine tools, Integrated circuits. Microelectronics, Semiconductor devices, Protection of and in buildings, Aids for disabled or handicapped persons, Electrical and electronic testing, General methods of tests and analysis for food products, Electromagnetic compatibility (EMC), Domestic electrical appliances in general, Rotating machinery.
RU-GOST R, MEMS detection | Noise detection
Military Standard of the People's Republic of China-General Armament Department, MEMS detection | Noise detection
- GJB 360.26-1987 Test methods for electronic and electrical components Particle impact noise detection
- GJB 3414A-2020 Phase noise test system calibration procedures
- GJB/J 3414-1998 Phase noise test system calibration procedures
Group Standards of the People's Republic of China, MEMS detection | Noise detection
中華人民共和國國家質量監督檢驗檢疫總局、中國國家標準化管理委員會, MEMS detection | Noise detection
- GB/T 34018-2017 Non-destructive testing—Test method for scanning ultrasonic microscopy
- GB/T 35001-2018 Microwave circuits—Measuring methoels for noise source
- GB/T 34892-2017 Non-destructive testing—Test method for robotic ultrasonic testing
- GB/T 34885-2017 Non-destructive testing—Electromagnetic ultrasonic testing—General principles
Professional Standard - Military and Civilian Products, MEMS detection | Noise detection
- WJ 2387-1997 Verification Regulations for Microwave and Millimeter Wave Phase Noise Test System
SCC, MEMS detection | Noise detection
British Standards Institution (BSI), MEMS detection | Noise detection
- BS EN 61265:1995 Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aircraft
- BS ISO 11843-7:2018 Capability of detection. Methodology based on stochastic properties of instrumental noise
- BS ISO 11843-7:2012 Capability of detection. Methodology based on stochastic properties of instrumental noise
- BS EN ISO 18081:2024 Non-destructive testing. Acoustic emission testing (AT). Leak detection by means of acoustic emission
National Metrological Verification Regulations of the People's Republic of China, MEMS detection | Noise detection
- JJG(電子) 310006-2006 Specification for verification of noise detectors for particle collision of devices
- JJG(郵電) 020-1993 Specification for verification of noise factor testers
- JJG(郵電) 006-1990 Specification for verification of white noise testing equipment
- JJG 721-2010 Verification Regulation of Phase Noise Measurement System
- JJG 2014-1987 Verification Scheme of Radio Frequency and Microwave Noise Measuring Instruments
- JJG(郵電) 017-1992 Specification for verification of medium frequency testers
- JJG 1095-2014 Environmental Noise Automatic Monitors
- JJG 839-1993 Verification Regulation of Noise Figure Meter
- JJG 721-1991 Verification Regulation of 500MHz Phase Noise Measurement Set (Phase Detector Method)
Association Francaise de Normalisation, MEMS detection | Noise detection
- NF S31-140:1995 Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure one-thirs-octave band sound pressure levels in noise certification of transport-category aeroplanes.
- NF C96-022-16*NF EN 60749-16:2003 Semiconductor devices - Mechanical and climatic test methods - Part 16 : particle impact noise dectection (PIND).
- NF EN IEC 61265:2018 Electroacoustics - Instruments for measuring aircraft noise - Requirements for systems for measuring sound pressure levels for aircraft noise certification
International Organization for Standardization (ISO), MEMS detection | Noise detection
- ISO 9902-3:2001 Textile machinery - Noise test code - Part 3: Nonwoven machinery
- ISO 9902-7:2001 Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery
- ISO 230-5:2000 Test code for machine tools - Part 5: Determination of the noise emisssion
- ISO 9902-1:2001 Textile machinery - Noise test code - Part 1: Common requirements
- ISO 9902-6:2018 Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery
- ISO 9902-6:2001 Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery
- ISO/CD 18081 Non-destructive testing — Acoustic emission testing (AT) — Leak detection by means of acoustic emission
- ISO 9902-5:2001 Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery
- ISO 9902-2:2001 Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, MEMS detection | Noise detection
- GB/T 27669-2011 Non-destructive testing.Ultrasonic inspection.Evaluating electronic characteristics of ultrasonic test instruments
- GB/T 32563-2016 Non-destructive testing.Ultrasonic testing.Test method for phased-array ultrasonic testing
- GB/T 10069.1-1988 Measurement of airborne noise emitted by rotating electrical machinery and the noise limits--Engineering method for the measurement of airborne noise
- GB 10069.3-1988 Measurement of airborne noise emitted by rotating electrical machinery and the noise limits--Noise limits
- GB/T 23902-2009 Non-destructive testing.Ultrasonic examination.Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
- GB/T 10069.2-1988 Measurement of dirborne noise emitted by rotating electrical machinery and the noise limits--Survey method for the measurement of airborne noise
AGMA - American Gear Manufacturers Association, MEMS detection | Noise detection
- 99FTM1-1999 Barkhausen Noise Inspection Method for Detecting Grinding Damage in Gears
GB-REG, MEMS detection | Noise detection
CZ-CSN, MEMS detection | Noise detection
- CSN ISO 6190:1994 Acoustics-Measurement of sound pressure levels of gas turbine installations for evaluating environmental noise.Survery method
Professional Standard - Aerospace, MEMS detection | Noise detection
- QJ 1323.18-1987 Electromagnetic relay test method Particle impact noise detection
ZA-SANS, MEMS detection | Noise detection
- SANS 12710:2003 Non-destructive testing - Ultrasonic inspection - Evaluating electronic characteristics of ultrasonic test instruments
(U.S.) Telecommunications Industries Association?, MEMS detection | Noise detection
- TIA TSB-5008-2014 Mechanically-Generated Balanced Twisted-Pair Cable Impulse Noise Detection and Characterization
TIA - Telecommunications Industry Association, MEMS detection | Noise detection
- TSB-5008-2014 Mechanically-Generated Balanced Twisted-Pair Cable Impulse Noise Detection and Characterization
European Committee for Standardization (CEN), MEMS detection | Noise detection
- EN ISO 4871:1996 Acoustics - Declaration and Verification of Noise Emission Values of Machinery and Equipment ISO 4871: 1996
- prEN ISO 18081 rev Non-destructive testing — Acoustic emission testing (AT) — Leak detection by means of acoustic emission
未注明發布機構, MEMS detection | Noise detection
- DIN 52210-6 E:2012-12 Testing of acoustics in buildings - Airborne and impact sound insulation - Determination of the level difference by shafts
- SAE ARP 4462C-2024 Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts
BE-NBN, MEMS detection | Noise detection
- NBN-ISO 3746:1992 Acoustics. Determination of sound power levels of noise sources. Survey method
German Institute for Standardization, MEMS detection | Noise detection
- DIN 52210-6:2013 Testing of acoustics in buildings - Airborne and impact sound insulation - Determination of the level difference by shafts
- DIN 52210-6:2012 Testing of acoustics in buildings - Airborne impact and sound insulation - Measurement of level difference
- DIN 52210-6:1989 Testing of acoustics in buildings; airborne impact and sound insulation; measurement of level difference
American National Standards Institute (ANSI), MEMS detection | Noise detection
GSO, MEMS detection | Noise detection
- GSO ISO 12710:2013 Non-destructive testing -- Ultrasonic inspection -- Evaluating electronic characteristics of ultrasonic test instruments
- GSO ISO 11843-7:2013 Capability of detection -- Part 7: Methodology based on stochastic properties of instrumental noise
- BH GSO ISO 11843-7:2016 Capability of detection -- Part 7: Methodology based on stochastic properties of instrumental noise
Taiwan Provincial Standard of the People's Republic of China, MEMS detection | Noise detection
工業和信息化部, MEMS detection | Noise detection
- JB/T 13935-2020 Non-destructive testing instrument ultrasonic detection ultrasonic diffraction sound time detector
HU-MSZT, MEMS detection | Noise detection
KR-KS, MEMS detection | Noise detection
- KS B ISO 12710-2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
Society of Automotive Engineers (SAE), MEMS detection | Noise detection
- SAE ARP4462A-2018 Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts
- SAE ARP4462-2010 BARKHAUSEN NOISE INSPECTION FOR DETECTING GRINDING BURNS IN HIGH STRENGTH STEEL PARTS
- SAE ARP4462B-2019 Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts
National Metrological Technical Specifications of the People's Republic of China, MEMS detection | Noise detection
- JJF 1220-2009 Calibration Specification for PIND(Particle Impact Noise Detection)
Korean Agency for Technology and Standards (KATS), MEMS detection | Noise detection
- KS B ISO 12710:2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
- KS I 6132-2014 Acoustics — Measurement of noise inside aircraft
- KS Q ISO 11843-7:2013 Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
Institute of Electrical and Electronics Engineers (IEEE), MEMS detection | Noise detection
- IEEE Std C63.2-1996 Electromagnetic noise and field strength instrumentation, 10 Hz to 40 GHz - Specifications
Danish Standards Foundation, MEMS detection | Noise detection
- DS/ISO 5129:1992 Acoustics. Measurement of noise inside aircraft
- DS/ISO 11843-7:2012 Capability of detection - Part 7: Methodology based on stochastic properties of instrumental noise
國家市場監督管理總局、中國國家標準化管理委員會, MEMS detection | Noise detection
- GB/T 4214.10-2021 Test method for noise of household and similar electrical appliances—Procedure for determining and verifying declared noise emission values
- GB/T 23902-2021 Non-destructive testing—Ultrasonic testing—Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
Professional Standard - Electron, MEMS detection | Noise detection
- SJ 20611-1996 Microwave circuits.Measuring methods for solid noise sources
- SJ/Z 9148-1987 Electroacoustic test equipment for aircraft noise assessment
Professional Standard - Machinery, MEMS detection | Noise detection
- JB/T 10559-2006 Non-desturctive testing of lifting appliances.Ultrasonic testing of steel welds
- JB/T 10559-2018 Ultrasonic testing of non-destructive testing steel welds for hoisting machinery
未注明發布機構, MEMS detection | Noise detection
- DIN 52210-6 E:2012-12 Testing of acoustics in buildings - Airborne and impact sound insulation - Determination of the level difference by shafts
- SAE ARP 4462C-2024 Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts
Professional Standard - Energy, MEMS detection | Noise detection
- NB/T 20003.2-2021 Non-destructive testing of nuclear island machinery and equipment in nuclear power plants Part 2: Ultrasonic testing
- NB/T 20003.2-2010 Non-destructive testing for mechanical components in nuclear island of nuclear power plants-Part 2: Ultrasonic testing
Standard Association of Australia (SAA), MEMS detection | Noise detection
- ISO 18081:2024 Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission
FI-SFS, MEMS detection | Noise detection
- SFS 3288-1976 Non-destructive testing. Ultrasonic testing. Detect fragment 1
ESDU - Engineering Sciences Data Unit, MEMS detection | Noise detection