ZH
KR
JP
ES
RU
DE

Intermediate and Accelerated Conditions

Intermediate and Accelerated Conditions, Total:164 items.

In the international standard classification, Intermediate and Accelerated Conditions involves: Industrial automation systems, Installations in buildings, Measurement of time, velocity, acceleration, angular velocity, Machine tools, Domestic, commercial and industrial heating appliances, Space systems and operations, Corrosion of metals, Electricity. Magnetism. Electrical and magnetic measurements, Bearings, Medical equipment, Non-destructive testing, Electronic tubes, Shipbuilding and marine structures in general, On-board equipment and instruments, Electrical accessories, Transport, Welding, brazing and soldering, Fuels, Machine tool systems, Glass, Leather technology, Plastics, Waxes, bituminous materials and other petroleum products, Construction materials, Road engineering, Aerospace electric equipment and systems, Telecontrol. Telemetering, Paper and board, Gears.

British Standards Institution (BSI), Intermediate and Accelerated Conditions

• BS ISO 10791-6:2014 Test conditions for machining centres. Accuracy of speeds and interpolations
• BS ISO 10791-6:1998 Test conditions for machining centres - Accuracy of feeds, speeds and interpolations
• BS ISO 10791-9:2001 Test conditions for machining centres - Evaluation of the operating times of tool change and pallet change
• BS ISO 16151:2006 Corrosion of metals and alloys - Accelerated cyclic tests with exposureto acidified salt spray, "dry" and "wet" conditions
• BS EN ISO 16701:2015 Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• BS ISO 10791-7:2020 Test conditions for machining centres - Accuracy of finished test pieces
• 23/30439967 DC BS EN ISO 16701 Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• BS ISO 10791-7:1998 Test conditions for machining centres - Accuracy of a finished test piece
• BS ISO 10791-7:2014 Test conditions for machining centres. Accuracy of finished test pieces
• BS ISO 10791-10:2022 Test conditions for machining centres. Evaluation of thermal distortions

Association Francaise de Normalisation, Intermediate and Accelerated Conditions

• NF ISO 10791-6:2015 Conditions d'essai pour centres d'usinage - Partie 6 : précision des vitesses et interpolations
• NF E60-172-6*NF ISO 10791-6:2015 Test conditions for machining centres - Part 6 : accuracy of speeds and interpolations
• NF A05-216*NF EN ISO 16701:2015 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• NF ISO 10791-9:2001 Test conditions for machining centers - Part 9: evaluation of tool changing and pallet changing operating times
• NF E60-172-6:1998 Test conditions for machining centres - Part 6 : accuracy of feeds, speeds and interpolations.
• NF ISO 10791-7:2020 Conditions d'essai pour centres d'usinage - Partie 7 : exactitude des pièces d'essai usinées

International Organization for Standardization (ISO), Intermediate and Accelerated Conditions

• ISO 10791-6:2014 Test conditions for machining centres - Part 6: Accuracy of speeds and interpolations
• ISO 10791-6:1998 Test conditions of machining centres - Part 6: Accuracy of feeds, speeds and interpolations
• ISO 10791-6:1998/Cor 1:2004 Test conditions for machining centres - Part 6: Accuracy of feeds, speeds and interpolations; Technical Corrigendum 1
• ISO/DIS 16701:2023 Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• ISO/CD 16701.2:2023 Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• ISO 10791-9:2001 Test conditons for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change
• ISO 10791-7:2014 Test conditions for machining centres - Part 7: Accuracy of finished test pieces
• ISO 10791-7:1998 Test conditions for machining centres - Part 7: Accuracy of a finished test piece
• ISO 5630-5:2008 Paper and board - Accelerated ageing - Part 5: Exposure to elevated temperature at 100 degrees C

工業和信息化部, Intermediate and Accelerated Conditions

• JB/T 13582.2-2019 High-Speed Horizontal Machining Centers Part 2: Technical Conditions
• JB/T 13581.2-2019 High-speed vertical machining centers Part 2: Technical conditions
• JB/T 13587.2-2019 High-speed five-axis linkage fixed-beam gantry machining center Part 2: Technical conditions
• QB/T 5250-2018 Leather color fastness test: color changes under accelerated aging conditions
• JB/T 13589.3-2019 Gantry machining center part 3: technical conditions

KR-KS, Intermediate and Accelerated Conditions

• KS B ISO 10791-6-2021 Test conditions for machining centres —Part 6: Accuracy of speeds and interpolations
• KS B ISO 10791-6-2016 Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations
• KS B ISO 10791-9-2021 Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
• KS B ISO 10791-9-2016 Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
• KS D 9502-2024 Neutral, acetic acid and copper-accelerated acetic acid salt spray

Korean Agency for Technology and Standards (KATS), Intermediate and Accelerated Conditions

• KS B ISO 10791-6:2021 Test conditions for machining centres —Part 6: Accuracy of speeds and interpolations
• KS B ISO 10791-6:2016 Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations
• KS B ISO 10791-6-2016(2021) Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations
• KS B ISO 10791-9:2021 Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
• KS B ISO 10791-9:2016 Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
• KS B ISO 10791-9-2016(2021) Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
• KS B ISO 10791-6:2014 Test conditions for machining centres-Part 6:Accuracy of feeds, speeds and interpolations
• KS B ISO 10791-6:2012 Test conditions for machining centres-Part 6:Accuracy of feeds, speeds and interpolations
• KS B ISO 10791-9:2010 Test conditions for machining centres-Part 9:Evaluation of the operating times of tool change and pallet change
• KS B ISO 10791-9:2014 Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
• KS B ISO 10791-7:2014 Test conditions for machining centres-Part 7:Accuracy of a finished test piece
• KS B ISO 10791-7:2007 Test conditions for machining centres-Part 7:Accuracy of a finished test piece
• KS D 9502-2020 Neutral, acetic acid and copper-accelerated acetic acid salt spray
• KS D 9502-2005 Neutral, acetic acid and copper-accelerated acetic acid salt spray
• KS M ISO 5630-5:2011 Paper and board-Accelerated ageing-Part 5:Exposure to elevated temperature at 100 ℃

GSO, Intermediate and Accelerated Conditions

• OS GSO ISO 10791-6:2013 Test conditions for machining centres -- Part 6: Accuracy of feeds, speeds and interpolations
• GSO ISO 10791-6:2013 Test conditions for machining centres -- Part 6: Accuracy of feeds, speeds and interpolations
• GSO ISO 16701:2013 Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• BH GSO ISO 10791-9:2016 Test conditions for machining centres -- Part 9: Evaluation of the operating times of tool change and pallet change
• GSO ISO 10791-9:2013 Test conditions for machining centres -- Part 9: Evaluation of the operating times of tool change and pallet change
• OS GSO ISO 16701:2013 Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• OS GSO ASTM D4798:2016 Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• BH GSO ASTM D4798:2017 Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

GOSTR, Intermediate and Accelerated Conditions

• GOST ISO 10791-6-2017 Machining centres. Test conditions. Part 6. Accuracy of speeds and interpolations

國家市場監督管理總局、中國國家標準化管理委員會, Intermediate and Accelerated Conditions

• GB/T 40278-2021 Paper and board—Accelerated ageing（exposure to light）
• GB/T 40166-2021 Paper and board—Accelerated ageing (exposure to nitrogen dioxide)
• GB/T 34880.3-2018 Inspection condition for 5-axis simultaneous machining center—Part 3: Specifications

Japanese Industrial Standards Committee (JISC), Intermediate and Accelerated Conditions

• JIS S 2071:2008 Standard use conditions, standard acceleration mode and test conditions for domestic gas and oil water heater
• JIS S 2073:2009 Standard use conditions, standard acceleration mode and test conditions for domestic direct vent type oil burning space heater
• JIS S 2074:2011 Standard use conditions, standard acceleration mode and test conditions for domestic gas combination water heating and hydronic heating appliance
• JIS S 2072:2009 Standard use conditions, standard acceleration mode and test conditions for domestic gas and oil water heater for bathtub
• JIS B 6336-6:2018 Machining centres -- Test conditions -- Part 6: Accuracy of speeds and interpolations

Professional Standard - Machinery, Intermediate and Accelerated Conditions

• JB/T 5516-1991 Accelerator calibration instrument - Specification
• JB/T 8801-1998 Machining centres.Specifications
• JB/T 8801-2017 Machining centres.Specifications
• JB/T 8923-1999 Rolling bearings.Specifications of vibration (acceleration)for steel balls
• JB/T 8773-1998 Precision machining centres.Specifications
• JB/T 8648.2-1997 Technical conditions of drilling machining center
• JB/T 8923-2010 Rolling bearings-Specifications for vibration(acceleration) of steel balls
• JB/T 10330-2012 Small hole high speed drilling electro-discharge machines.Technical requirements
• JB/T 8561-1997 Specifications for Acceleration Vibration Meters for Rolling Bearings
• JB/T 3779-2002 High speed auxiliary relay
• JB/T 10330.1-2002 High speed small hole drilling electro-discharge machines -Part 1:Techenical requirements
• JB/T 7047-1999 Rolling bearings.Specification of vibration(acceleration)for deep groove ball bearings
• JB/T 7047-2006 Rolling Bearings.Specifications of vibration (acceleration) for deep groove ball bearings
• JB/T 8771.7-1998 Test conditions of machining centres.Part 7:Accuracy of finished test piece
• JB/T 10237-2001 Rolling bearings.Specifications of vibration(acceleration) for tapered roller bearings
• JB/T 10237-2014 Rolling bearings.Vibration (acceleration) for tapered roller bearings.Specifications
• JB/T 8648.2-2008 Drilling machining centres.Part 2: Specifications

RU-GOST R, Intermediate and Accelerated Conditions

• GOST ISO 13041-5-2016 The lathes with numerical control and CNC machining centers. Test conditions. Part 5. Accuracy speeds and interpolations
• GOST 23197-1978 X-ray acceleration cameras. General specifications
• GOST 33903-2016 Gasolines. Determination of the stability under accelerated oxidation conditions (induction period)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Intermediate and Accelerated Conditions

• GB/T 18400.6-2001 Test conditions for machining centres--Part 6: Accuracy of feeds, speeds and interpolations
• GB/T 21012-2007 Precision machining centers.Specifications
• GB/T 20853-2007 Corrosion of metals and alloys Corrosion in artificial atmosphere Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent sprayingof a salt solution
• GB/T 18400.9-2007 Test conditions for machining centres.Part 9:Evaluaton of the operating times of tool change and pallet change
• GB/T 10098-1988 The specification of marine gearbox for medium speed diesel engine
• GB 18568-2001 Machining centres--Safeguarding specification
• GB/T 32333-2015 Rolling bearings.Measuring methods and specifications for vibration (acceleration)
• GB/T 18400.7-2010/ISO 10791 7:1998 Machining Center Inspection Conditions Part 7: Precision Inspection of Finished Test Pieces
• GB/T 22894-2008 Paper and board.Accelerated ageing.Moist heat treatment at 80℃ and 65℃ relative humidity
• GB/T 17116.3-2018(英文版) Pipe supports and hangers—Part 3:Middle connection attachments and building structure attachments
• GB/T 18400.7-2010 Test conditions for machining centres.Part 7:Accuracy of a finished test piece

SCC, Intermediate and Accelerated Conditions

• 12/30205788 DC BS ISO 10791-6. Test conditions for machining centres. Part 6. Accuracy of speeds and interpolations
• AENOR UNE 15450-6:2000 Machine tools. Test conditions of machining centers. Part 6: Precision of feeds, speeds and interpolations.
• AENOR UNE 53042:1970 Plastic materials. Test methods under accelerated conditions of use.
• BS EN ISO 16151:2008 Corrosion of metals and alloys. Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions
• BS EN ISO 16701:2008 Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• DANSK DS/EN ISO 16701:2015 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• UNE-EN ISO 16701:2009 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2003)
• NS-EN ISO 16701:2008 Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2003)
• ISO 10791-7:2014/DAmd 1 Test conditions for machining centers — Part 7: Accuracy of machined test parts — Amendment 1
• DIN 70020-3 E:2005 Draft Document - Automotive engineering - Part 3: Testing conditions, maximum speed, accelleration and elasticity, mass, other terms and definitions

Professional Standard - Aviation, Intermediate and Accelerated Conditions

• HB 6156-1988 General technical conditions for conventional linear accelerometers
• HB 6167.16-1988 Environmental conditions and test methods for airborne equipment of civil aircraft Acceleration
• HB 5830.4-1982 Airborne Equipment Environmental Conditions and Test Methods Constant Acceleration

Professional Standard - Aerospace, Intermediate and Accelerated Conditions

• QJ 2162-1991 General specifications for spring accelerometers
• QJ 1928-1990 General specification for liquid floating pendulum accelerometer
• QJ 1929-1990 General technical specifications for hydrostatic gyro accelerometers

Professional Standard - Petroleum, Intermediate and Accelerated Conditions

• SY/T 0524-1993 Technical conditions for heat medium indirect heating device

AENOR, Intermediate and Accelerated Conditions

• UNE 15450-6:2000 Machine-tools. Test conditions of machining centres. Part 6: Accuracy of feeds, speeds and interpolations.

Professional Standard - Electron, Intermediate and Accelerated Conditions

• SJ 1457-1979 General specification for general purpose low and medium speed electronic counters
• SJ 20115.8-1992 Environmental conditions and test methods for aircraft radar.Constant acceleration test

ES-UNE, Intermediate and Accelerated Conditions

• UNE-EN ISO 16701:2015 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015, Corrected version 2018-10)

Professional Standard-Ships, Intermediate and Accelerated Conditions

• CB/T 4313-2013 Specification of solid crankshaft forgings for median speed diesel engine
• CB/T 1186-1998 Specification of solid crankshaft forgings for median speed diesel engine
• CB/T 4198-2011 Technical specification of marine medium speed diesel gearbox
• CB/T 3406-1991 Specifications for forged steel crankshafts for marine medium-speed diesel engines

IT-UNI, Intermediate and Accelerated Conditions

• EC 1-2021 UNI EN ISO 16701:2021 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution

Danish Standards Foundation, Intermediate and Accelerated Conditions

• DS/EN ISO 16701:2008 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution

German Institute for Standardization, Intermediate and Accelerated Conditions

• DIN EN ISO 16701:2008 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2003); German version EN ISO 16701:
• DIN EN ISO 16701:2015-10 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015); German version EN ISO 167...

European Committee for Standardization (CEN), Intermediate and Accelerated Conditions

• prEN ISO 16701 rev Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• CEN EN ISO 16701:2008 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2003)
• prEN ISO 16701 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO/DIS 16701:2023)

HU-MSZT, Intermediate and Accelerated Conditions

• MNOSZ 159-1956 8 days/short term plus swing general technical conditions

Hunan Provincial Standard of the People's Republic of China, Intermediate and Accelerated Conditions

• DB43/T 2310-2022 Technical conditions of inspection vehicles for medium and low speed maglev lines

GM North America, Intermediate and Accelerated Conditions

• GM 9985356-1989 Adhesive, Instant, Cyanoacrylate Accelerator

Anhui Provincial Standard of the People's Republic of China, Intermediate and Accelerated Conditions

• DB34/T 2314-2015 Inspection Conditions and Evaluation of Thermal Deformation of CNC Machining Center

Association of German Mechanical Engineers, Intermediate and Accelerated Conditions

• DVS 1194-1984 DVS conditions for participating in DVS training center training and examinations
• DVS 1194-1982 DVS conditions for participation in training and examination in DVS training centres

未注明發布機構, Intermediate and Accelerated Conditions

• DIN EN ISO 16701 E:2011-10 Corrosion of Metals and Alloys Corrosion in Artificial Atmospheres Accelerated Corrosion Testing Involving Exposure and Intermittent Spraying of Salt Solutions under Controlled Conditions of Humidity Cycles (Draft)
• DIN ISO 5630-5 E:2016-10 Paper and board - Accelerated ageing - Part 5: Exposure to elevated temperature at 100 °C
• GJB 7615-2012 General specification for intermediate and tail reducers for military helicopters

Professional Standard - Urban Construction, Intermediate and Accelerated Conditions

• CJ/T 375-2011 General technical specification for medium and low speed maglev vehicles
• CJ/T 413-2012 Technical specification for low and medium speed maglev train transport rail row
• CJ/T 412-2012 Technical specification for medium and low speed maglev turnout
• CJ/T 411-2012 Technical specification for the electrical system of medium and low speed maglev vehicle

Group Standards of the People's Republic of China, Intermediate and Accelerated Conditions

• T/TZZL 4-2019 Text conditions for machining center Heavy Cutting Test
• T/TZZL 3-2019 Text conditions for machining center Accuracy test of three axis machining precision specimen
• T/ZZB 1599-2020 Counter shaft for auxiliary gearbox applied to welded dual counter shaft transmission

BELST, Intermediate and Accelerated Conditions

• STB 1679-2006 Cultivators for inter-row tillage. Basic technical conditions

Lithuanian Standards Office , Intermediate and Accelerated Conditions

• LST EN ISO 16701:2008 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2003)
• LST EN ISO 16701:2015 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015)

Professional Standard - Building Materials, Intermediate and Accelerated Conditions

• JC/T 2069-2011 Spacer for insulating glass units.Part 1:Aluminum spacer
• JC/T 2453-2018 Spacer for insulating glass unit.Part 3:Warm edge spacer

American Society for Testing and Materials (ASTM), Intermediate and Accelerated Conditions

• ASTM D1042-93 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
• ASTM D4798/D4798M-10 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D1042-01a Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
• ASTM D4798-08 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D4798/D4798M-11 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D1042-01 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
• ASTM D4798/D4798M-11(2021) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D4798/D4798M-09 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

RO-ASRO, Intermediate and Accelerated Conditions

• STAS 11948-1987 BEARINGS FOR CARDANIG TRANSMISSIONS Dimensions

VN-TCVN, Intermediate and Accelerated Conditions

• TCVN 7068-1-2008 Paper and board.Accelerated ageing.Part 1: Dry heat treatment at 105 degrees C

SE-SIS, Intermediate and Accelerated Conditions

• SIS 02 01 21-1968 Atmospheric conditions and time for testing

Society of Motion Picture and Television Engineers (SMPTE), Intermediate and Accelerated Conditions

• SMPTE RP 180-1999 Spectral Conditions Defining Printing Density in Motion-Picture Negative and Intermediate Films

VDI - Verein Deutscher Ingenieure, Intermediate and Accelerated Conditions

• VDI/NCG 5211 Blatt 1-2013 Testing guidelines and testing workpieces for high speed cutting (HSC) - Milling machines and machining centres for 3-axis machining

Others:   acceleration condition, Accelerate intermediate conditions, intermediate acceleration condition, Accelerated Conditions Intermediate Conditions Long Term Conditions, Intermediate and Accelerated Conditions, intermediate condition accelerated condition, accelerated conditions, intermediate conditions, long-term conditions, Accelerated test intermediate conditions, Accelerated, intermediate and long-term conditions, Accelerated Intermediate Long-Term Conditions, accelerated long-run intermediate condition, accelerated, long run, intermediate conditions, Accelerated test intermediate conditions, Accelerated Conditions and Long-Term Conditions, long run condition accelerated condition intermediate condition.