ZH
KR
JP
ES
RU
DE

Accelerated test intermediate conditions

Accelerated test intermediate conditions, Total:156 items.

In the international standard classification, Accelerated test intermediate conditions involves: Industrial automation systems, Aerospace electric equipment and systems, Telecontrol. Telemetering, Installations in buildings, Machine tools, Environmental testing, Leather technology, Waxes, bituminous materials and other petroleum products, On-board equipment and instruments, Corrosion of metals, Aircraft and space vehicles in general, Construction materials, Electrical and electronic testing, Road engineering, Measurement of time, velocity, acceleration, angular velocity, Machine tool systems, Domestic, commercial and industrial heating appliances, Wood-based panels, Plastics, Power transmission and distribution networks, Equipment for the chemical industry, Adhesives, Refrigerating technology, Test conditions and procedures in general.

British Standards Institution (BSI), Accelerated test intermediate conditions

• BS ISO 10791-6:2014 Test conditions for machining centres. Accuracy of speeds and interpolations
• BS ISO 10791-6:1998 Test conditions for machining centres - Accuracy of feeds, speeds and interpolations
• BS ISO 10791-7:2020 Test conditions for machining centres - Accuracy of finished test pieces
• BS ISO 10791-7:1998 Test conditions for machining centres - Accuracy of a finished test piece
• BS ISO 10791-7:2014 Test conditions for machining centres. Accuracy of finished test pieces
• BS EN 60068-2-67:1996 Environmental testing - Test methods - Test Cy - Damp heat, steady state, accelerated test primarily intended for components
• BS ISO 10791-9:2001 Test conditions for machining centres - Evaluation of the operating times of tool change and pallet change
• BS ISO 10791-10:2007 Test conditions for machining centres - Evaluation of thermal distortions
• BS ISO 23945-1:2022 Test methods for sprayed concrete - Flash setting accelerating admixtures. Setting time
• BS ISO 13041-6:2009 Test conditions for numerically controlled turning machines and turning centres - Accuracy of a finished test piece
• BS ISO 16151:2006 Corrosion of metals and alloys - Accelerated cyclic tests with exposureto acidified salt spray, "dry" and "wet" conditions
• BS ISO 10791-8:2001 Test conditions for machining centres - Evaluation of contouring performance in the three coordinate planes

Korean Agency for Technology and Standards (KATS), Accelerated test intermediate conditions

• KS B ISO 10791-6:2016 Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations
• KS B ISO 10791-6:2021 Test conditions for machining centres —Part 6: Accuracy of speeds and interpolations
• KS B ISO 10791-6-2016(2021) Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations
• KS B ISO 10791-7:2014 Test conditions for machining centres-Part 7:Accuracy of a finished test piece
• KS B ISO 10791-7:2007 Test conditions for machining centres-Part 7:Accuracy of a finished test piece
• KS B ISO 10791-6:2012 Test conditions for machining centres-Part 6:Accuracy of feeds, speeds and interpolations
• KS B ISO 10791-6:2014 Test conditions for machining centres-Part 6:Accuracy of feeds, speeds and interpolations
• KS B ISO 10791-9-2016(2021) Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
• KS B ISO 10791-9:2016 Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
• KS B ISO 10791-9:2021 Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
• KS B ISO 10791-7:2016 Test conditions for machining centres — Part 7: Accuracy of a finished test piece
• KS B ISO 10791-7-2016(2021) Test conditions for machining centres — Part 7: Accuracy of a finished test piece
• KS A 5608-1-2006(2017) Accelerated life test－Part 1：Outline of accelerated life test
• KS A 5608-1-2006(2022) Accelerated life test－Part 1：Outline of accelerated life test
• KS B ISO 10791-7:2021 Test conditions for machining centres —Part 7: Accuracy of finished test pieces
• KS A 5608-2-2006(2022) Accelerated life test－Part 2：Design of accelerated life test
• KS D ISO 11474-2017(2022) Corrosion of metals and alloys－Corrosion tests in artificial atmosphere－Accelerated outdoor test by intermittent spraying of a salt solution(Scab test)
• KS A 5608-1-2022 Accelerated life test－Part 1：Outline of accelerated life test
• KS B ISO 10791-9:2014 Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
• KS B ISO 10791-9:2010 Test conditions for machining centres-Part 9:Evaluation of the operating times of tool change and pallet change
• KS A 5608-2-2006 Accelerated life test－Part 2：Design of accelerated life test
• KS B ISO 10791-10:2016 Test conditions for machining centres — Part 10: Evaluation of thermal distortions
• KS A 5608-1-2006 Accelerated life test-Part 1:Outline of accelerated life test
• KS A 5608-2-2006(2017) Accelerated life test－Part 2：Design of accelerated life test
• KS B ISO 10791-10:2021 Test conditions for machining centres —Part 10: Evaluation of thermal distortions
• KS A 5608-2-2022 Accelerated life test－Part 2：Design of accelerated life test
• KS B ISO 10791-10-2016(2021) Test conditions for machining centres — Part 10: Evaluation of thermal distortions
• KS A 5608-3-2006(2022) Accelerated life test－Part 3：Data analysis of accelerated life test
• KS A 5608-3-2022 Accelerated life test－Part 3：Data analysis of accelerated life test
• KS A 5608-3-2006(2017) Accelerated life test－Part 3：Data analysis of accelerated life test
• KS B ISO 10791-10:2009 Test conditions for machining centres-Part 10:Evaluation of thermal distortions
• KS B ISO 10791-10:2014 Test conditions for machining centres — Part 10: Evaluation of thermal distortions
• KS D ISO 11474-2022 Corrosion of metals and alloys－Corrosion tests in artificial atmosphere－Accelerated outdoor test by intermittent spraying of a salt solution(Scab test)

KR-KS, Accelerated test intermediate conditions

• KS B ISO 10791-6-2021 Test conditions for machining centres —Part 6: Accuracy of speeds and interpolations
• KS B ISO 10791-9-2021 Test conditions for machining centres — Part 9: Evaluation of the operating times of tool change and pallet change
• KS B ISO 10791-7-2016 Test conditions for machining centres — Part 7: Accuracy of a finished test piece
• KS B ISO 10791-6-2016 Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations
• KS B ISO 10791-7-2021 Test conditions for machining centres —Part 7: Accuracy of finished test pieces
• KS B ISO 10791-10-2021 Test conditions for machining centres —Part 10: Evaluation of thermal distortions
• KS D ISO 11474-2017 Corrosion of metals and alloys－Corrosion tests in artificial atmosphere－Accelerated outdoor test by intermittent spraying of a salt solution(Scab test)

GSO, Accelerated test intermediate conditions

• OS GSO ISO 10791-6:2013 Test conditions for machining centres -- Part 6: Accuracy of feeds, speeds and interpolations
• GSO ISO 10791-6:2013 Test conditions for machining centres -- Part 6: Accuracy of feeds, speeds and interpolations
• OS GSO ISO 10791-7:2013 Test conditions for machining centres -- Part 7: Accuracy of a finished test piece
• BH GSO ISO 10791-7:2016 Test conditions for machining centres -- Part 7: Accuracy of a finished test piece
• BH GSO ISO 10791-9:2016 Test conditions for machining centres -- Part 9: Evaluation of the operating times of tool change and pallet change
• GSO ISO 16701:2013 Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• GSO ISO 10791-10:2013 Test conditions for machining centres -- Part 10: Evaluation of thermal distortions
• BH GSO ISO 10791-10:2016 Test conditions for machining centres -- Part 10: Evaluation of thermal distortions
• OS GSO ISO 10791-10:2013 Test conditions for machining centres -- Part 10: Evaluation of thermal distortions
• OS GSO ASTM D4798:2016 Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• BH GSO ASTM D4798:2017 Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• OS GSO ISO 16701:2013 Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• GSO ISO 10791-1:2015 Test conditions for machining centres -- Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)

Association Francaise de Normalisation, Accelerated test intermediate conditions

• NF ISO 10791-7:2020 Conditions d'essai pour centres d'usinage - Partie 7 : exactitude des pièces d'essai usinées
• NF ISO 10791-6:2015 Conditions d'essai pour centres d'usinage - Partie 6 : précision des vitesses et interpolations
• NF E60-172-6*NF ISO 10791-6:2015 Test conditions for machining centres - Part 6 : accuracy of speeds and interpolations
• NF ISO 10791-10:2022 Conditions d'essai des centres d'usinage - Partie 10 : évaluation des déformations thermiques
• NF E60-172-6:1998 Test conditions for machining centres - Part 6 : accuracy of feeds, speeds and interpolations.
• NF E60-172-7:1998 Test conditions for machining centres. Part 7 : accuracy of a finished test piece.
• NF B51-262:1972 Particle boards. Accelerated ageing by boiling water.(so-called test "V 100").
• NF A05-216*NF EN ISO 16701:2015 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• NF X15-016:1981 ENCLOSURES WITH AUTOMATIC TEMPERATURE AND HUMIDITY CONTROL.
• NF P84-509:1994 Géomembranes - Comportement dans l'eau - Essai accéléré et essai à long terme - Examen gravimétrique.
• NF X15-015:1973 MEASUREMENT OF RELATIVE HUMIDITY BY MEANS OF ELECTROLYTIC HYGROMETERS.

Professional Standard - Electron, Accelerated test intermediate conditions

• SJ 20115.8-1992 Environmental conditions and test methods for aircraft radar.Constant acceleration test

SCC, Accelerated test intermediate conditions

• ISO 10791-7:2014/DAmd 1 Test conditions for machining centers — Part 7: Accuracy of machined test parts — Amendment 1
• AENOR UNE 15450-6:2000 Machine tools. Test conditions of machining centers. Part 6: Precision of feeds, speeds and interpolations.
• AENOR UNE 15450-7:2000 Machine tools. Test conditions of machining centers. Part 7: Precision of a machined test piece.
• AENOR UNE 53042:1970 Plastic materials. Test methods under accelerated conditions of use.
• 12/30205788 DC BS ISO 10791-6. Test conditions for machining centres. Part 6. Accuracy of speeds and interpolations
• DANSK DS/EN ISO 16701:2015 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Accelerated test intermediate conditions

• GB/T 18400.7-2010/ISO 10791 7:1998 Machining Center Inspection Conditions Part 7: Precision Inspection of Finished Test Pieces
• GB/T 18400.7-2010 Test conditions for machining centres.Part 7:Accuracy of a finished test piece
• GB/T 20957.7-2007 Test conditions for precision machining centres.Part 7:Accuracy of a finished test piece
• GB/T 18400.6-2001 Test conditions for machining centres--Part 6: Accuracy of feeds, speeds and interpolations
• GB/T 20853-2007 Corrosion of metals and alloys Corrosion in artificial atmosphere Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent sprayingof a salt solution

Japanese Industrial Standards Committee (JISC), Accelerated test intermediate conditions

• JIS S 2071:2008 Standard use conditions, standard acceleration mode and test conditions for domestic gas and oil water heater
• JIS S 2073:2009 Standard use conditions, standard acceleration mode and test conditions for domestic direct vent type oil burning space heater
• JIS B 6336-6:2018 Machining centres -- Test conditions -- Part 6: Accuracy of speeds and interpolations

International Organization for Standardization (ISO), Accelerated test intermediate conditions

• ISO 10791-6:2014 Test conditions for machining centres - Part 6: Accuracy of speeds and interpolations
• ISO 10791-7:2014 Test conditions for machining centres - Part 7: Accuracy of finished test pieces
• ISO 10791-7:1998 Test conditions for machining centres - Part 7: Accuracy of a finished test piece
• ISO 10791-6:1998 Test conditions of machining centres - Part 6: Accuracy of feeds, speeds and interpolations
• ISO 10791-7:2020 Test conditions for machining centres — Part 7: Accuracy of finished test pieces
• ISO 23945-1:2022 Test methods for sprayed concrete — Part 1: Flash setting accelerating admixtures — Setting time
• ISO 10791-10:2022 Test conditions for machining centres — Part 10: Evaluation of thermal distortions
• ISO 5148:2022 Plastics — Determination of specific aerobic biodegradation rate of solid plastic materials and disappearance time (DT50) under mesophilic laboratory test conditions
• ISO/DIS 16701:2023 Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• ISO/CD 16701.2:2023 Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
• ISO 10791-6:1998/Cor 1:2004 Test conditions for machining centres - Part 6: Accuracy of feeds, speeds and interpolations; Technical Corrigendum 1
• ISO 14993:2001 Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions
• ISO 14993:2018 Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions

Professional Standard - Aviation, Accelerated test intermediate conditions

• HB 5830.4-1982 Airborne Equipment Environmental Conditions and Test Methods Constant Acceleration
• HB 6167.16-1988 Environmental conditions and test methods for airborne equipment of civil aircraft Acceleration
• HB 6167.16-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 16: Acceleration test

Group Standards of the People's Republic of China, Accelerated test intermediate conditions

• T/TZZL 3-2019 Text conditions for machining center Accuracy test of three axis machining precision specimen
• T/TZZL 4-2019 Text conditions for machining center Heavy Cutting Test
• T/CIE 147-2022 Technical specifications for accelerated life test evaluation of space traveling wave tubes
• T/JAR 008/1-2023 Specification for ultra-rapid thermal shock testing machine

Professional Standard - Machinery, Accelerated test intermediate conditions

• JB/T 8771.7-1998 Test conditions of machining centres.Part 7:Accuracy of finished test piece
• JB/T 8772.7-1998 Test conditions of precision machining centres.Part 7:Accuracy of a finished test piece
• JB/T 5516-1991 Accelerator calibration instrument - Specification
• JB/T 8771.2-1998 Test conditions of machining centres.Part 2:Geometric tests for machines with vertical spindle

RU-GOST R, Accelerated test intermediate conditions

• GOST ISO 10791-7-2016 Machining centres. Test conditions. Part 7. Accuracy of finished test pieces
• GOST ISO 13041-5-2016 The lathes with numerical control and CNC machining centers. Test conditions. Part 5. Accuracy speeds and interpolations

IT-UNI, Accelerated test intermediate conditions

• UNI ISO 10791-7:2021 Test conditions for machining centres — Part 7: Accuracy of finished test pieces
• EC 1-2021 UNI EN ISO 16701:2021 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution

工業和信息化部, Accelerated test intermediate conditions

• QB/T 5250-2018 Leather color fastness test: color changes under accelerated aging conditions
• JB/T 13582.2-2019 High-Speed Horizontal Machining Centers Part 2: Technical Conditions
• JB/T 13581.2-2019 High-speed vertical machining centers Part 2: Technical conditions

GOSTR, Accelerated test intermediate conditions

• GOST ISO 10791-6-2017 Machining centres. Test conditions. Part 6. Accuracy of speeds and interpolations

American Society for Testing and Materials (ASTM), Accelerated test intermediate conditions

• ASTM D4798-00 Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D4798-01 Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D4798/D4798M-10 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D4798-08 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D4798/D4798M-11 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D4798/D4798M-11(2021) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D4798/D4798M-09 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D4798-04 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D3434-00(2013) Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
• ASTM D4798/D4798M-11(2016) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D3434-00 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives

Standard Association of Australia （SAA）, Accelerated test intermediate conditions

• AS 2597.12:1983 Methods of testing seat belts - Determination of retractor locking under acceleration

PL-PKN, Accelerated test intermediate conditions

• PN E04160-31-1991 Electric cables Test methods Accelerated ageing in air

German Institute for Standardization, Accelerated test intermediate conditions

• DIN ISO 10791-7:2001 Machine tools - Test conditions for machining centres - Part 7: Accuracy of a finished test piece (ISO 10791-7:1998)
• DIN EN ISO 16701:2008 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2003); German version EN ISO 16701:

Military Standard of the People's Republic of China-General Armament Department, Accelerated test intermediate conditions

• GJB 360.22-1987 Test methods for electronic and electrical components Acceleration test
• GJB 5103-2004 Accelerated life test method for ammunition components

IFI/FASTNR - Industrial Fastener Institute, Accelerated test intermediate conditions

• 170-2006 Accelerated Corrosion Test for Mechanical Fasteners

Taiwan Provincial Standard of the People's Republic of China, Accelerated test intermediate conditions

• CNS 15077-7-2007 Test conditions for machining centers - Part 7 : Accuracy of finished test piece

GM North America, Accelerated test intermediate conditions

• GM GM9540P-1997 Accelerated Corrosion Test

CZ-CSN, Accelerated test intermediate conditions

• CSN 65 6322-1956 Accelerated rust test
• CSN 34 5749-1982 Linear acceleration test

Professional Standard - Railway, Accelerated test intermediate conditions

• TB/T 2794-1997 Technical conditions of overspeed parking device test bench

國家市場監督管理總局、中國國家標準化管理委員會, Accelerated test intermediate conditions

• GB/T 34880.3-2018 Inspection condition for 5-axis simultaneous machining center—Part 3: Specifications

Professional Standard - Electricity, Accelerated test intermediate conditions

• DL/T 1098-2009 Requirements and tests for overhead line spacers
• DL/T 1298-2009 Spacer technical conditions and test methods
• DL/T 1098-2016 Spacer technical conditions and test methods

Professional Standard - Chemical Industry, Accelerated test intermediate conditions

• HG/T 3122-1998 Specifications of the drum tester for tryes endurance or hight speed test

European Committee for Standardization (CEN), Accelerated test intermediate conditions

• prEN ISO 16701 rev Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution

Danish Standards Foundation, Accelerated test intermediate conditions

• DS/EN ISO 16701:2008 Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution

Spanish Association for Standardization (UNE), Accelerated test intermediate conditions

• UNE 15450-6:2000 Machine-tools. Test conditions of machining centres. Part 6: Accuracy of feeds, speeds and interpolations.

IN-BIS, Accelerated test intermediate conditions

• IS 3394-1985 Accelerated life test method for resistance alloys for heating elements

中華人民共和國國家質量監督檢驗檢疫總局、中國國家標準化管理委員會, Accelerated test intermediate conditions

• GB/T 16462.6-2017 Test conditions for numerically controlled turning machines and turning centers—Part 6: Accuracy of a finished test piece

Others:   acceleration condition, Intermediate condition stability test, Stability test intermediate conditions, intermediate condition test english, Accelerate intermediate conditions, intermediate acceleration condition, What is an intermediate condition test, Accelerated Conditions Intermediate Conditions Long Term Conditions, Intermediate and Accelerated Conditions, intermediate condition accelerated condition, accelerated conditions, intermediate conditions, long-term conditions, Accelerated test intermediate conditions, Accelerated, intermediate and long-term conditions, Accelerated Intermediate Long-Term Conditions, accelerated long-run intermediate condition, Stability test intermediate conditions, accelerated, long run, intermediate conditions, Accelerated test intermediate conditions, Intermediate Conditions for Stability Tests, long run condition accelerated condition intermediate condition.